Design Student Honours CPAP Survey

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
designstudent
Posts: 4
Joined: Thu May 09, 2019 5:20 pm

Design Student Honours CPAP Survey

Post by designstudent » Fri May 10, 2019 4:17 am

Hi

My name is Kyle Smith from the Queensland University of Technology School of Design, Creative Industries Faculty and I’m doing a research project as part of my honours about the experiences of CPAP use.

If you’d like to help me in this study I’m looking for respiratory clinicians and patients with varying levels of experience with CPAP to complete a 10 minute online questionnaire. Participants need to be over 18 years of age.

Please review this information sheet before you begin: https://bit.ly/2WAIVyC

If you are interested in completing the survey, please follow this link: https://forms.gle/Q3Q4uG1gdj8VdKnd8

If you have any questions, please message me directly.

Please note that this study has been approved by the QUT Human Research Ethics Committee (approval number 1800000355).

Many thanks for helping me out with this.
Regards,

Kyle Smith
Bachelor of Design – Honours Student

User avatar
Julie
Posts: 19923
Joined: Tue Feb 28, 2006 12:58 pm

Re: Design Student Honours CPAP Survey

Post by Julie » Fri May 10, 2019 6:15 am

Is the study funded by a particuar company that makes Cpaps?

Are they getting free marketing info through your work?

Do you get paid in some way for doing the work?
Last edited by Julie on Fri May 10, 2019 10:10 am, edited 1 time in total.

User avatar
ChicagoGranny
Posts: 14543
Joined: Sun Jan 29, 2012 1:43 pm
Location: USA

Re: Design Student Honours CPAP Survey

Post by ChicagoGranny » Fri May 10, 2019 6:54 am

designstudent wrote:
Fri May 10, 2019 4:17 am
Many thanks for helping me out with this.
I have completed the survey. Good luck with your project.

(You should ignore the nitwit comments some members will make here. They do it all the time.)

User avatar
Dog Slobber
Posts: 3976
Joined: Thu Feb 15, 2018 2:05 pm
Location: Ontario, Canada

Re: Design Student Honours CPAP Survey

Post by Dog Slobber » Fri May 10, 2019 7:15 am

Completed.

NoOnesPerfect
Posts: 161
Joined: Thu May 09, 2019 7:29 am
Location: Washington, USA

Re: Design Student Honours CPAP Survey

Post by NoOnesPerfect » Fri May 10, 2019 7:40 am

There was a typo - contected instead of contacted - toward the end of the survey. Obviously not a big deal of course. I would have liked to have seen an open ended “anything else you would like to say?” box at the end also.

User avatar
Jay Aitchsee
Posts: 2936
Joined: Sun May 22, 2011 12:47 pm
Location: Southwest Florida

Re: Design Student Honours CPAP Survey

Post by Jay Aitchsee » Fri May 10, 2019 7:58 am

done

_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
Additional Comments: S9 Auto, P10 mask, P=7.0, EPR3, ResScan 5.3, SleepyHead V1.B2, Windows 10, ZEO, CMS50F, Infrared Video

Arlene1963
Posts: 546
Joined: Thu Nov 05, 2015 5:43 am

Re: Design Student Honours CPAP Survey

Post by Arlene1963 » Fri May 10, 2019 8:22 am

Completed.

User avatar
katestyles
Posts: 610
Joined: Sun Jan 06, 2019 9:08 am

Re: Design Student Honours CPAP Survey

Post by katestyles » Fri May 10, 2019 8:34 am

done

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: Back up mask - anything in the drawer


User avatar
booksfan
Posts: 460
Joined: Fri Feb 09, 2018 7:20 pm
Location: Triangle area, NC

Re: Design Student Honours CPAP Survey

Post by booksfan » Fri May 10, 2019 8:58 am

done

_________________
Machine: AirSense 11 Autoset
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: AirMini for travel, with Eclipse/Halos. OSCAR software.
Mask: Bleep Eclipse/Halos
Machine: ResMed AirSense 11 AutoSet

Lucyhere
Posts: 1949
Joined: Sun Oct 18, 2015 2:45 pm

Re: Design Student Honours CPAP Survey

Post by Lucyhere » Fri May 10, 2019 12:38 pm

Completed.
Resmed AirSense 10 Autoset for her w/humid air/heated Humidifier
Bleep/P10

User avatar
Bookit
Posts: 143
Joined: Sat Oct 20, 2018 2:52 pm
Location: Florida

Re: Design Student Honours CPAP Survey

Post by Bookit » Fri May 10, 2019 1:20 pm

Completed

That's a pretty good survey for an honors student. I know. I work with them. :)

_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear
Additional Comments: pressure 9.6 - 20. No ramp. Exhalation relief 3. Humidity 4.
I don't want to sleep like a baby. I want to sleep like my husband. Resmed AirSense 10 for her. Pillows. Humidity 4.

User avatar
squid13
Posts: 2299
Joined: Fri Jul 15, 2011 3:47 pm
Location: Pensacola, FL

Re: Design Student Honours CPAP Survey

Post by squid13 » Fri May 10, 2019 2:35 pm

I completed the survey, and good luck with your project.

_________________
Machine: ResMed AirCurve 10 ASV Machine with Heated Humidifier
Mask: Evora Full Face Mask - Fitpack
Additional Comments: AirCurve 10 ASV, Oscar V1.0.1-r-1
US Navy Retired 1973,AirCurve 10 ASV, Mode: ASV Auto, Min EPAP: 7.2, Max EPAP: 15.0, Min PS:4.0, Max PS: 15.0, Mask ResMed Airtouch F20, Backup: (2) AirCurve 10 ASV

User avatar
jagzoo
Posts: 340
Joined: Tue Jan 15, 2013 7:14 pm
Location: Nh

Re: Design Student Honours CPAP Survey

Post by jagzoo » Fri May 10, 2019 4:59 pm

Done

_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear
Additional Comments: Heated Tubing; mask sometimes is TAP PAP mask; now P10 nasal pillows; use Sleepyhead software
APAP 9-12

designstudent
Posts: 4
Joined: Thu May 09, 2019 5:20 pm

Re: Design Student Honours CPAP Survey

Post by designstudent » Fri May 10, 2019 5:46 pm

Julie wrote:
Fri May 10, 2019 6:15 am
Is the study funded by a particuar company that makes Cpaps?

Are they getting free marketing info through your work?

Do you get paid in some way for doing the work?
No, this is my own work and technically only funded by me.

It is for my final year as part of my honours project.
Regards,

Kyle Smith
Bachelor of Design – Honours Student