software to read respironics series M smartcard?

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
georgepds
Posts: 143
Joined: Fri Nov 21, 2008 4:43 pm

software to read respironics series M smartcard?

Post by georgepds » Mon Nov 21, 2016 12:27 pm

I use an older machine, M Series Bipap Auto with a smart card

Way back when I started using a bipap, I had a smart card reader, and some software that could crack the data on the card an produce reports on a windows machine ( probably XP) . After a while, I just used the cpap, and stopped reading the reports

I’d like to look at the data again ( now using windows 7) .. Anyone have a clue what software to use
TIA

--G

_________________
Mask: Ultra Mirage™ II Nasal CPAP Mask with Headgear
Top
User avatar
palerider
Posts: 32300
Joined: Wed Dec 16, 2009 5:43 pm
Location: Dallas(ish).

Re: software to read respironics series M smartcard?

Post by palerider » Mon Nov 21, 2016 12:38 pm

encore is the only thing that reads it, basic, pro, viewer, depending on which version you find.

there's links over on apneaboard for it.

_________________
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: S9 VPAP Auto
Get OSCAR

Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Top
Woody
Posts: 592
Joined: Sat Mar 10, 2007 7:59 pm

Re: software to read respironics series M smartcard?

Post by Woody » Mon Nov 21, 2016 4:38 pm

Were you using Encore Basic with your Windows Xp machine ? I upgraded my Windows Xp to
windows 7 and Encore Basic still works fine for me. I have Windows 10 on another machine
but just haven't gotten around to trying Encore Basic on it.

_________________
Machine: DreamStation Auto CPAP Machine
Mask: Ultra Mirage™ Full Face CPAP Mask with Headgear
Humidifier: DreamStation Heated Humidifier
Additional Comments: SleapyHead software
Top
xyz
Posts: 407
Joined: Fri Dec 07, 2007 1:38 pm

Re: software to read respironics series M smartcard?

Post by xyz » Mon Nov 21, 2016 4:41 pm

Be sure to get the free EncoreBasic version.
It works on Win 7.
I made the mistake of buying the higher version.
It's not any more useful than EncoreBasic.
Top
User avatar
Pugsy
Posts: 64083
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: software to read respironics series M smartcard?

Post by Pugsy » Mon Nov 21, 2016 6:02 pm

Encore Basic seems to work fine on my Windows 10 laptop that I upgraded last year from Win 7 to Win 10.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
Top
User avatar
6PtStar
Posts: 2659
Joined: Mon Jun 18, 2007 1:58 pm
Location: Texas, Is there any other place?

Re: software to read respironics series M smartcard?

Post by 6PtStar » Mon Nov 21, 2016 11:32 pm

Pugsy wrote:Encore Basic seems to work fine on my Windows 10 laptop that I upgraded last year from Win 7 to Win 10.
What version Encore Basic are you running on Windows 10. I have version 2.1 on my Windows 7 machine but I think Windows 10 may be in my near future.

Jerry

_________________
Humidifier: HC150 Heated Humidifier With Hose, 2 Chambers and Stand
Additional Comments: 11cm/H2O, Encore Pro 1.8i, Pro Analyzer, Encore Viewer1.0 - 3 Remstar Pro2's, 1 Remstar Auto
Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting: "Wow what a ride!"
I still play Cowboys and Bad Guys but now I use real bullets. CAS
Top
Woody
Posts: 592
Joined: Sat Mar 10, 2007 7:59 pm

Re: software to read respironics series M smartcard?

Post by Woody » Tue Nov 22, 2016 12:39 am

I am running encore basic 2.4

_________________
Machine: DreamStation Auto CPAP Machine
Mask: Ultra Mirage™ Full Face CPAP Mask with Headgear
Humidifier: DreamStation Heated Humidifier
Additional Comments: SleapyHead software
Top
User avatar
Pugsy
Posts: 64083
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: software to read respironics series M smartcard?

Post by Pugsy » Tue Nov 22, 2016 7:36 am

6PtStar wrote: What version Encore Basic are you running on Windows 10. I have version 2.1 on my Windows 7 machine but I think Windows 10 may be in my near future.
Encore 2.4xx
it's the latest version I have been able to find.
There could be a newer version but I haven't seen it or heard.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
Top
User avatar
georgepds
Posts: 143
Joined: Fri Nov 21, 2008 4:43 pm

Re: software to read respironics series M smartcard?

Post by georgepds » Tue Nov 22, 2016 12:42 pm

Thanks for the response

But.. i can't seem to find a place to downlord or buy Encore basic.

can someone point me in the right direction?

_________________
Mask: Ultra Mirage™ II Nasal CPAP Mask with Headgear
Top
User avatar
OkyDoky
Posts: 2870
Joined: Mon Aug 25, 2014 5:18 pm

Re: software to read respironics series M smartcard?

Post by OkyDoky » Tue Nov 22, 2016 12:57 pm

I sent you a PM.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
Additional Comments: Sleepyhead Software
ResMed Aircurve 10 VAUTO EPAP 11 IPAP 15 / P10 pillows mask / Sleepyhead Software / Back up & travel machine Respironics 760
Top
User avatar
6PtStar
Posts: 2659
Joined: Mon Jun 18, 2007 1:58 pm
Location: Texas, Is there any other place?

Re: software to read respironics series M smartcard?

Post by 6PtStar » Tue Nov 22, 2016 1:36 pm

Pugsy wrote:
6PtStar wrote: What version Encore Basic are you running on Windows 10. I have version 2.1 on my Windows 7 machine but I think Windows 10 may be in my near future.
Encore 2.4xx
it's the latest version I have been able to find.
There could be a newer version but I haven't seen it or heard.
Thanks, I think I know where I can find a copy. As long as it works don't need a newer version.

Jerry

_________________
Humidifier: HC150 Heated Humidifier With Hose, 2 Chambers and Stand
Additional Comments: 11cm/H2O, Encore Pro 1.8i, Pro Analyzer, Encore Viewer1.0 - 3 Remstar Pro2's, 1 Remstar Auto
Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting: "Wow what a ride!"
I still play Cowboys and Bad Guys but now I use real bullets. CAS
Top
User avatar
OkyDoky
Posts: 2870
Joined: Mon Aug 25, 2014 5:18 pm

Re: software to read respironics series M smartcard?

Post by OkyDoky » Tue Nov 22, 2016 2:32 pm

georgepds wrote:Thanks for the response

But.. i can't seem to find a place to downlord or buy Encore basic.

can someone point me in the right direction?
Georgepds, I sent you a Private Message. Look at the top left of the screen where it says User Control Panel and click on the new messages.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
Additional Comments: Sleepyhead Software
ResMed Aircurve 10 VAUTO EPAP 11 IPAP 15 / P10 pillows mask / Sleepyhead Software / Back up & travel machine Respironics 760
Top
User avatar
georgepds
Posts: 143
Joined: Fri Nov 21, 2008 4:43 pm

Re: software to read respironics series M smartcard?

Post by georgepds » Wed Nov 23, 2016 3:33 pm

OkyDoky

A public thanks for your help

--G

_________________
Mask: Ultra Mirage™ II Nasal CPAP Mask with Headgear
Top


Return to “CPAP and Sleep Apnea Message Board”