Reduce noise on Airmini and use any mask

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
Brpkxh
Posts: 1
Joined: Sat Feb 09, 2019 11:30 am

Re: Reduce noise on Airmini and use any mask

Post by Brpkxh » Sat Feb 09, 2019 11:35 am

Thank you for solving this issue. After spending close to 1k I was heartbroken with the noise, especially since the Resmed 10 is so quiet. No returns by my store either. I have ordered muffler and having converter printed today! Will post once I put it all together and check out the noise reduction.

dodgerfan
Posts: 2
Joined: Sat Feb 02, 2019 1:25 am

Re: Reduce noise on Airmini and use any mask

Post by dodgerfan » Sat Feb 09, 2019 5:39 pm

lnichols wrote:
Mon Feb 04, 2019 12:10 am
Sorry, I am rather new to CPAP. The heading mentions AirMini. What is a “normal CPAP tube?” And how do I connect the mask that came with my AirMini to this Qtube? Thanks!

I'm new too and am having EXACTLY the same issue! I have my Qtube and the adapter, but we're scratching our heads as to how to connect the mask's tubing.

dodgerfan
Posts: 2
Joined: Sat Feb 02, 2019 1:25 am

Re: Reduce noise on Airmini and use any mask

Post by dodgerfan » Sat Feb 09, 2019 6:07 pm

I misunderstood the adapter and Qtube when I ordered both of them as I thought they'd both made my mini's mask quieter. I can't say I notice a difference in noise using my regular mask's tubing vs. the Airmini's. I'm leaving on a business trip soon and no more time to mess around with this equipment. I haven't even tried the humidification thing because I didn't want to prematurely open the packaging. I wonder if that helps or hurts the noise level.

I'll add that I wrote to ResMed and they were not terribly helpful. I'm in the medical device industry myself, so I'm surprised they were less than empathic or concerned.

Maybe I'll get used to the whole thing. Ugh.

digitaldog888
Posts: 22
Joined: Sun Jul 22, 2018 3:56 pm

Re: Reduce noise on Airmini and use any mask

Post by digitaldog888 » Tue Feb 19, 2019 5:36 pm

dodgerfan wrote:
Sat Feb 09, 2019 5:39 pm
lnichols wrote:
Mon Feb 04, 2019 12:10 am
Sorry, I am rather new to CPAP. The heading mentions AirMini. What is a “normal CPAP tube?” And how do I connect the mask that came with my AirMini to this Qtube? Thanks!

I'm new too and am having EXACTLY the same issue! I have my Qtube and the adapter, but we're scratching our heads as to how to connect the mask's tubing.
Sorry but I haven't checked this thread lately. Hopefully, the picture below could help you with how everything is connected together.
Attachments
Webp.net-resizeimage.jpg
Webp.net-resizeimage.jpg (335.7 KiB) Viewed 14148 times

henryga
Posts: 2
Joined: Wed Mar 06, 2019 12:22 pm

Re: Reduce noise on Airmini and use any mask

Post by henryga » Wed Mar 06, 2019 12:30 pm

Hello
I had a friend print this for me from the posted link on thingyverse and it will not fit into my AirMini.... is there a trick to make it fit? or to make it print differently?? I can try to sandpaper it down but then I was worried about the inside pieces lining up?

Any thoughts or tips would be welcome!

gary

digitaldog888
Posts: 22
Joined: Sun Jul 22, 2018 3:56 pm

Re: Reduce noise on Airmini and use any mask

Post by digitaldog888 » Wed Mar 06, 2019 2:13 pm

henryga wrote:
Wed Mar 06, 2019 12:30 pm
Hello
I had a friend print this for me from the posted link on thingyverse and it will not fit into my AirMini.... is there a trick to make it fit? or to make it print differently?? I can try to sandpaper it down but then I was worried about the inside pieces lining up?

Any thoughts or tips would be welcome!

gary
Each printer is different and may print differently for the same object. The important thing about 3D printing is to ensure the printer is properly calibrated. The only thing I could suggest is to have your friend scale down the print in the slicer program he's using. As this is a relatively small print, it shouldn't take more than 20-30 minutes to print.

JustinFe
Posts: 1
Joined: Mon Apr 01, 2019 4:43 pm

Re: Reduce noise on Airmini and use any mask

Post by JustinFe » Mon Apr 01, 2019 4:48 pm

Hi All,

Just spent my first night with the airmini, I'm as disappointed as the rest of you.
That breathing noise kept me awake, then would wake me up.
I found myself with my fingers in my ears trying to figure out if earplugs would help.
Good grief, got it to go on a cruise tomorrow, I'll just have to deal with it I guess.

Not a happy Resmed customer.

alankholic
Posts: 2
Joined: Thu Apr 18, 2019 12:08 pm

Re: Reduce noise on Airmini and use any mask

Post by alankholic » Thu Apr 18, 2019 12:10 pm

Sorry for the double post
Last edited by alankholic on Fri Apr 19, 2019 8:29 am, edited 2 times in total.

alankholic
Posts: 2
Joined: Thu Apr 18, 2019 12:08 pm

Re: Reduce noise on Airmini and use any mask

Post by alankholic » Thu Apr 18, 2019 12:13 pm

Hi,
Thank you for the file to print the adapter, what should it cost me to have that printed?

User avatar
chunkyfrog
Posts: 34378
Joined: Mon Jul 12, 2010 5:10 pm
Location: Nebraska--I am sworn to keep the secret of this paradise.

Re: Reduce noise on Airmini and use any mask

Post by chunkyfrog » Thu Apr 18, 2019 12:33 pm

HEY, RESMED--YOU MESSED UP.
--like they care . . .

_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear
Additional Comments: Airsense 10 Autoset for Her

mowog73
Posts: 5
Joined: Tue May 14, 2019 9:32 am

Re: Reduce noise on Airmini and use any mask

Post by mowog73 » Tue May 14, 2019 9:46 am

I've found exactly what others have mention: the AirMini is extremely noisy, with the noise coming from the Humidx assembly. I wish I would have known about the noise issue prior to buying the machine (bought 1 month ago).

Thanks for the 3D hose connector adaptor, I'm going to look into getting one printed so that I can use the hose from my ResMed AirSense 10 AutoSet with the AirMini.

juaquin
Posts: 62
Joined: Wed Sep 05, 2018 7:10 pm

Re: Reduce noise on Airmini and use any mask

Post by juaquin » Tue May 14, 2019 8:53 pm

henryga wrote:
Wed Mar 06, 2019 12:30 pm
Hello
I had a friend print this for me from the posted link on thingyverse and it will not fit into my AirMini.... is there a trick to make it fit? or to make it print differently?? I can try to sandpaper it down but then I was worried about the inside pieces lining up?

Any thoughts or tips would be welcome!

gary
3D printers are very finicky, it is hard to get perfectly calibrated prints from hobby printers. You could order one from Shapeways, which use very high-end printers, or you could just buy one of the adapters available online like this: https://www.ebay.com/itm/1PC-Air-Mini-U ... 3493920913

mowog73
Posts: 5
Joined: Tue May 14, 2019 9:32 am

Re: Reduce noise on Airmini and use any mask

Post by mowog73 » Wed May 15, 2019 8:07 am

juaquin wrote:
Tue May 14, 2019 8:53 pm
3D printers are very finicky, it is hard to get perfectly calibrated prints from hobby printers. You could order one from Shapeways, which use very high-end printers, or you could just buy one of the adapters available online like this: https://www.ebay.com/itm/1PC-Air-Mini-U ... 3493920913
Thanks for the link to the adapter. I'll be receiving it in 18-47 business days.

rechandi
Posts: 1
Joined: Sat May 25, 2019 11:55 am

Re: Reduce noise on Airmini and use any mask

Post by rechandi » Sat May 25, 2019 12:27 pm

Hi,
Thank all for the great posts, I wanted a solution that would keep the original Mask and AirMini but quiet down using the idea of the posters to use the Qtube.

So here is what I did:

1) Got the adapter on ebay to convert AirMini output to regular tubing (This will allow to connect the QTube muffler)

Ebay (best price but 2 weeks shipment time) This is what I did.
https://www.ebay.com/itm/1PC-CPAP-BiPA ... 49.l2649

Amazon https://www.amazon.com/Portable-Univer ... 93&sr=8-3

2) Purchase the QTube muffler that includes a small cpap tube extension.

Amazon https://www.amazon.com/Portable-Univers ... 193&sr=8-3

3) Get adapter that allows the Airmini Mask tubing to connect to the Qtube.

Amazon https://www.amazon.com/gp/product/B07L ... TF8&psc=1

I tested this adapter and the fit is good.

It definitely reduces the noise and consider it worth it although not as quiet as the Airsense10, quiet enough to sleep.

Here is a picture of the components that match the numbers I used previously.
IMG_8707.jpg
IMG_8707.jpg (688.08 KiB) Viewed 13466 times

avd
Posts: 1
Joined: Sat Jun 08, 2019 6:14 am

Re: Reduce noise on Airmini and use any mask

Post by avd » Sat Jun 08, 2019 6:19 am

Just want to add my voice to this thread. Very disappointed with noise level of this machine. The response from RESMED is sort of like, "well so what we conned you" out of $1,000. It really feels like class action time.