First thing to check is the silicone gasget that fits between the two halves of the humidifier tub, make sure it is seated properly, or check that it is not pinched or otherwise compromised. Second check the seals where the tub connects to the outflow tubes from the machine http://i453.photobucket.c...

You'd have to reverse the hose and use it backwards which is doable but very awkward at the mask end, but it is an option

Maryland, As far as the time issue is concerned........the time that Sleepyhead or Rescan picks up for their reports is based on the clock that you can adjust on the machine. I have read that some shift workers that sleep during the day and then work all night simply set the clock on the Resmed eith...

On the Resmeds the machine's clock can be set/adjusted by the user........might want to first verify that your A10 clock is set to the correct time........that's also what the data's time is based on for your software.

I am not going to mention my maximum hose length here.......it's just too personal

That's not how the Auto Ramp feature works Maryland...... http://i453.photobucket.com/albums/qq260/Dawg357/image.jpg1_9.jpg Perhaps that is how it is supposed to work, but in actual practice, it never went to my minimum target pressure. It stayed at the lower ramp pressure all night. This is on a b...

That's not how the Auto Ramp feature works Maryland...... http://i453.photobucket.com/albums/qq260/Dawg357/image.jpg1_9.jpg Perhaps that is how it is supposed to work, but in actual practice, it never went to my minimum target pressure. It stayed at the lower ramp pressure all night. This is on a b...

That's not how the Auto Ramp feature works Maryland......

I've used it on my machine, it seems to be fairly accurate, on occasion I will feel it ramp up while I am still awake, but I'd say in general it works fairly well. You are correct that it guesses that you are asleep by a change in your breathing pattern, breathing pattern is a good proxy, but not 10...

#1...Attitude #2...Mask #3...Proper Pressure #4...Type of Machine I think LSAT has it properly boiled down in the right order. There are those that have a "Will Make it Work no mater what" attitude, and then there are those that don't, or aren't there yet. Fortunately most people that come here are...

Ooooooh!

I'll trade you my Travel machine for yours !!!

Eleong2, To demonstrate how utterly disappointed I am in the Q-Tube performance I would be MORE than happy to send you the Q-Tube Kit with slimline hose connector and spare replacement foam liner, with manual, in the mail. I will send it to you so you can perform an assessment of your own and report...

what do you mean? Did you actually buy a new machine specifically for travel, I guess one of those small ones? Or do you take an old one and leave the newer, good one at home so it is safe? How do you end up with 2 machines to start with, unless you've been on this a long time? My Ins. will replace...

Eleong2, Got home a bit early today so I just spent about an hour testing the two machines (Z1 Auto, Transcend Auto) side by side, with same mask, same standard six foot hose to mask with the HME heat/moisture cartridge in place between hose and mask, same pressure both machines. I tested both with ...

Eleong, I do have the Transcend machine, I will hook up the Q-Tube to it tonight and let you know. On the Z1 the Q-Tube made just a slight reduction in noise, but so little it really didn't make much difference with or without it, was still unacceptably noisy in reference to the Darth Vader issue. I...