So...can't wait till Friday

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
Pugsy
Posts: 63942
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: So...can't wait till Friday

Post by Pugsy » Sun Apr 22, 2018 9:07 am

There is a setting in the setup menu for type of mask used.
I didn't know which mask so I think it is probably on pillows so you want to go change it to full face mask.
It's not a deal breaker to have it wrong but might as well have it correct.

As for the lack of noise now...who knows...aliens maybe. Maybe the lid wasn't quite tight on the humidifier and it popped loose. Those latches are sensitive and if you didn't latch it good the air flowing through the humidifier will break the seal and make an awful racket.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.

User avatar
Barb (Seattle)
Posts: 663
Joined: Wed Aug 03, 2005 6:41 pm

Re: So...can't wait till Friday

Post by Barb (Seattle) » Sun Apr 22, 2018 9:55 am

Next problem lol I put my sd card in unlocked. It erased it. No biggie it's new. Unlocked in the machine locked for laptop... right?
USED to be on DreamStation..now on S9 VPAP ADAPT
21 years on CPAP

Mirage Quattro Air Small

User avatar
Pugsy
Posts: 63942
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: So...can't wait till Friday

Post by Pugsy » Sun Apr 22, 2018 10:23 am

Yeah...it wanted to have the SD card just perfect and that's why it wanted to fix it. S9s are peculiar that way.

So yes...locked in your computer
Unlocked in the S9 so that it can write to the card. If I remember correctly it will tell you if you forget and leave the card locked.
Just watch the screen on the S9 when you insert the card and if it doesn't squawk at you or bitch...you are fine. :lol:

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.

User avatar
Barb (Seattle)
Posts: 663
Joined: Wed Aug 03, 2005 6:41 pm

Re: So...can't wait till Friday

Post by Barb (Seattle) » Sun Apr 22, 2018 11:51 am

:lol: :lol:


SO......this just happened :) I took a nap and it's not overnight yet, or anything...but even with naps on the other machine, I was having 30 ahi even for 1/2 an hour...sometimes 39. still not sure how to read the charts....it looks like the time is off for when I slept....shrug (maybe on your time?) even the date says 21st
this is the 22nd....and I took the nap today not yesterday lol

is it too early to celebrate? :D :mrgreen: :mrgreen: :mrgreen:
https://imgur.com/aMq1p5Z


Image
USED to be on DreamStation..now on S9 VPAP ADAPT
21 years on CPAP

Mirage Quattro Air Small

User avatar
Barb (Seattle)
Posts: 663
Joined: Wed Aug 03, 2005 6:41 pm

Re: So...can't wait till Friday

Post by Barb (Seattle) » Sun Apr 22, 2018 11:56 am

How do I tell if it went up extremely high to cover a central?

it obviously did in any case. tonight is going to be epic :mrgreen: :mrgreen:






Image


Image
Last edited by Barb (Seattle) on Sun Apr 22, 2018 12:13 pm, edited 1 time in total.
USED to be on DreamStation..now on S9 VPAP ADAPT
21 years on CPAP

Mirage Quattro Air Small

prodigyplace
Posts: 1739
Joined: Mon Mar 27, 2017 5:45 pm
Location: Central Virginia

Re: So...can't wait till Friday

Post by prodigyplace » Sun Apr 22, 2018 12:05 pm

The day on CPAP machine goes from Noon to Noon.
If you napped in the morning, it may be a day off.

_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
Additional Comments: ClimateLineAir Heated Tube & Sleepyhead software
Please visit our sponsor, CPAP.com at https://www.cpap.com/ for all your CPAP needs.

User avatar
Pugsy
Posts: 63942
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: So...can't wait till Friday

Post by Pugsy » Sun Apr 22, 2018 12:08 pm

I meant to change the clock and forgot.
Just go in and set the date and time correct for your area. Can you find it? There's a clock to set and a calendar. I forget exactly where but I think under the little tool or gear thing in the menu...it's the same area where you can erase the therapy data or see the total run hours.

Hard to tell when the machine kick in if it needed to kill a central but look for quick fast upward swing over 20.
The one at approx 11:00 on the graph might have been one.

How is it comfort wise while awake?
Will have a better idea after tonight.

Also...unplug the machine and then plug it back into the electric...just in case it wants to stick on 0.0.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.

User avatar
Pugsy
Posts: 63942
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: So...can't wait till Friday

Post by Pugsy » Sun Apr 22, 2018 12:10 pm

SleepyHead reports the date a little weird when you end up splitting the noon start of a new reporting period like with this nap.....just make sure the calendar date on the machine is correct and you will be fine.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.

User avatar
Barb (Seattle)
Posts: 663
Joined: Wed Aug 03, 2005 6:41 pm

Re: So...can't wait till Friday

Post by Barb (Seattle) » Sun Apr 22, 2018 1:50 pm

Pugsy wrote:
Sun Apr 22, 2018 12:08 pm
I meant to change the clock and forgot.
Just go in and set the date and time correct for your area. Can you find it? There's a clock to set and a calendar. I forget exactly where but I think under the little tool or gear thing in the menu...it's the same area where you can erase the therapy data or see the total run hours.

Hard to tell when the machine kick in if it needed to kill a central but look for quick fast upward swing over 20.
The one at approx 11:00 on the graph might have been one.

How is it comfort wise while awake?
Will have a better idea after tonight.

Also...unplug the machine and then plug it back into the electric...just in case it wants to stick on 0.0.
ok lol I thought that might be the reason. it was GREAT for the nap. barely knew I had it on <3 <3 <3
USED to be on DreamStation..now on S9 VPAP ADAPT
21 years on CPAP

Mirage Quattro Air Small

User avatar
Jas_williams
Posts: 1120
Joined: Tue Dec 19, 2017 2:12 pm
Location: Somerset UK

Re: So...can't wait till Friday

Post by Jas_williams » Sun Apr 22, 2018 2:57 pm

In the mask pressure graph you can see the blue lines jumping upto nearly 20CM that is the pressure ramping up to encourage a breath the section at 11:45 would be good to zoom in on and take a look at what the machine is doing. The machine is working hard to normalise your breathing and doing a great job I hope tonight is as good for you.


Jason

_________________
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: Using sleepyhead and a pressure of 6 - 21 Resmed S9 Adapt SV with a Bleep Sleep Mask

User avatar
Barb (Seattle)
Posts: 663
Joined: Wed Aug 03, 2005 6:41 pm

Re: So...can't wait till Friday

Post by Barb (Seattle) » Sun Apr 22, 2018 5:06 pm

I took another nap just because it's fun now lol can't wait to see what tonight brings. I will do anything for one of these machines. definitely what I need. NEVER got these numbers even with naps with my DreamStation




Image
USED to be on DreamStation..now on S9 VPAP ADAPT
21 years on CPAP

Mirage Quattro Air Small

User avatar
Barb (Seattle)
Posts: 663
Joined: Wed Aug 03, 2005 6:41 pm

Re: So...can't wait till Friday

Post by Barb (Seattle) » Sun Apr 22, 2018 5:17 pm

It is so nice to not be frustrated any more :mrgreen:



Image
USED to be on DreamStation..now on S9 VPAP ADAPT
21 years on CPAP

Mirage Quattro Air Small

User avatar
Pugsy
Posts: 63942
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: So...can't wait till Friday

Post by Pugsy » Sun Apr 22, 2018 5:21 pm

Now you know why when I tried it (on a lark) I didn't want to give it up. :lol:
The second image showing 17:03.....I think you can see the machine giving you the high PS when you flat lined and the little UA flag...that's a very brief obstructive apnea...probably barely made criteria.

Just wait until tonight. If you are napping easily with it...tonight will be a cake walk.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.

User avatar
Barb (Seattle)
Posts: 663
Joined: Wed Aug 03, 2005 6:41 pm

Re: So...can't wait till Friday

Post by Barb (Seattle) » Sun Apr 22, 2018 5:22 pm

where's the bouncing smiley :mrgreen: :mrgreen:
USED to be on DreamStation..now on S9 VPAP ADAPT
21 years on CPAP

Mirage Quattro Air Small

User avatar
Pugsy
Posts: 63942
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: So...can't wait till Friday

Post by Pugsy » Sun Apr 22, 2018 5:24 pm

Oh...ignore the SH settings being reported as Max IPAP at 30..it's not. The machine can't go that high. That's just a little bug in SH not reporting the settings 100% accurately.

And I have compared the other data from SH with ResScan...and it matches.

You don't get the Smiley on SH unless your AHI is 0.0...and invariably there seems to always be 1 event of some sort screwing you out of it but eventually you will get it.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.