F&P Icon quit logging data

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
smtheg
Posts: 2
Joined: Sat May 26, 2018 6:48 pm

F&P Icon quit logging data

Post by smtheg » Sat May 26, 2018 6:58 pm

I have been using an F&P Icon Auto for the past few years. I use SleepyHead to download the data to see it on my computer. All of a sudden it quit logging data during the night. The downloads to SleeyHead show no data for the past five nights. This happened after not downloading data for two nights. After the third night I downloaded the data and saw that nothing was showing up for the last three nights. Fourth night and fifth night still show no data. Has anyone encountered this problem and were they able to fix it? Many thanks.

User avatar
LSAT
Posts: 13232
Joined: Sun Nov 16, 2008 10:11 am
Location: SE Wisconsin

Re: F&P Icon quit logging data

Post by LSAT » Sat May 26, 2018 9:31 pm

Possible bad SD card..get a new one and try it. Check to make sure the SD card you are using is not "locked".

smtheg
Posts: 2
Joined: Sat May 26, 2018 6:48 pm

Re: F&P Icon quit logging data

Post by smtheg » Sun May 27, 2018 11:19 pm

LSAT, How do I check if my card has become locked? And if it's locked, how do I unlock it? Thanks.

User avatar
wm_hess
Posts: 334
Joined: Sat Oct 16, 2010 2:39 am

Re: F&P Icon quit logging data

Post by wm_hess » Mon May 28, 2018 4:33 am

Here is an example of locked and unlocked SD cards. If it's locked, your machine cannot write to it. You will need to unlock it, and reinsert it into your machine. If it's not locked, you may want to put it in your computer and try to view the contents.

You can get the smallest capacity sd card available at Walmart or the like for $8-10.

Image

-Bill

_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier
Mask: AirFit™ F10 Full Face Mask with Headgear
Additional Comments: CMS-50I Wrist Pulse Oximeter, SP02 Review, Sleepyhead

User avatar
Pugsy
Posts: 64014
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: F&P Icon quit logging data

Post by Pugsy » Mon May 28, 2018 4:38 am

Couple things I would try.
A different/new SD card and a new user profile in SleepyHead.
If the new card and new profile still shows no data then the machine is ailing in terms of writing data to the SD card.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.