still here
still here
Hey Everyone! Just letting you know I'm still here. Not making hardly any progress with my CPAP but I'm just letting that ride for now with the other stuff I have going on. Some nights I just don't even put it on. The nights I do, I don't seem to last more than 3 hours. I ordered a new mask (the Sleepweaver). We'll see if that helps. If not they have a 30 day return policy so I figure I have nothing to lose. If it works, that would be great. if not, I'll return it.
Just wanted to let you know I'm still around and checking in. Just don't have much to contribute these days.
oxxoxoxo
Amy
Just wanted to let you know I'm still around and checking in. Just don't have much to contribute these days.
oxxoxoxo
Amy
_________________
Mask: AirFit™ N20 Nasal CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Re: still here
howdy,
Glad you're still hanging in there. There's lots of posts on the SleepWeaver cause it starts out very comfortable and leaky. I've had 3 versions; the newer are less leaky.. make SURE it's the ADVANCED seal. It stays very comfortable, and I think with wear it seems to seal better. Hope this all works out for you. Earl in W TX
Glad you're still hanging in there. There's lots of posts on the SleepWeaver cause it starts out very comfortable and leaky. I've had 3 versions; the newer are less leaky.. make SURE it's the ADVANCED seal. It stays very comfortable, and I think with wear it seems to seal better. Hope this all works out for you. Earl in W TX
- Sir NoddinOff
- Posts: 4190
- Joined: Mon May 14, 2012 5:30 pm
- Location: California
Re: still here
Good luck with your new mask, hope it solves your problems.
_________________
Mask: AirFit™ F10 Full Face Mask with Headgear |
Additional Comments: Sleepyhead software v.0.9.8.1 Open GL and Encore Pro v2.2. |
I like my ResMed AirFit F10 FFM - reasonably low leaks for my ASV therapy. I'm currently using a PR S1 AutoSV 960P Advanced. I also keep a ResMed S9 Adapt as backup. I use a heated Hibernite hose. Still rockin' with Win 7 by using GWX to stop Win 10.
- Stormynights
- Posts: 2273
- Joined: Wed Mar 10, 2010 7:01 pm
- Location: Oklahoma
Re: still here
Good to see you again.pandatx wrote:Hey Everyone! Just letting you know I'm still here. Not making hardly any progress with my CPAP but I'm just letting that ride for now with the other stuff I have going on. Some nights I just don't even put it on. The nights I do, I don't seem to last more than 3 hours. I ordered a new mask (the Sleepweaver). We'll see if that helps. If not they have a 30 day return policy so I figure I have nothing to lose. If it works, that would be great. if not, I'll return it.
Just wanted to let you know I'm still around and checking in. Just don't have much to contribute these days.
oxxoxoxo
Amy
_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Pressure EPAP 5.8 IPAP 9.4-21.8 PS 3.6/16 S9 Vpap Adapt ASV |
Re: still here
Unfortunately I didn't order the Advanced (just double checked with cpap.com). But I can return and exchange. Should I even try the Elan out? Or just send it right back for the Advanced?
_________________
Mask: AirFit™ N20 Nasal CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Re: still here
Try it. There are people who hated the Advanced and loved the Elan.pandatx wrote:Should I even try the Elan out?
Remember when it comes to any mask...one man's treasure is another man's trash.
You have it coming and have the free trial period....use it.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
- Stormynights
- Posts: 2273
- Joined: Wed Mar 10, 2010 7:01 pm
- Location: Oklahoma
Re: still here
I prefer the Elan but both are very comfortable.pandatx wrote:Unfortunately I didn't order the Advanced (just double checked with cpap.com). But I can return and exchange. Should I even try the Elan out? Or just send it right back for the Advanced?
_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Pressure EPAP 5.8 IPAP 9.4-21.8 PS 3.6/16 S9 Vpap Adapt ASV |
Re: still here
good advice! will try it and report back
_________________
Mask: AirFit™ N20 Nasal CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
- Drowsy Dancer
- Posts: 1271
- Joined: Mon Feb 28, 2011 9:35 am
- Location: here
Re: still here
Namaste, y'all.
_________________
Machine: PR System One REMStar 60 Series Auto CPAP Machine |
Mask: Swift™ FX Bella Nasal Pillow CPAP Mask with Headgears |
Additional Comments: Software: SleepyHead. Pressure: APAP 9.5 min/11 max, A-Flex x2 |
How we squander our hours of pain. -- Rilke
Re: still here
that's right
Namaste <3
Namaste <3
_________________
Mask: AirFit™ N20 Nasal CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
- Dreamingofsleep
- Posts: 229
- Joined: Sat Feb 23, 2013 11:16 am
Re: still here
Dear Aimee,
Keep on a trying!!! Great job Let us know how the Dreamweaver works. I may try it too!
Dreaming
Keep on a trying!!! Great job Let us know how the Dreamweaver works. I may try it too!
Dreaming
- SleepingBetty
- Posts: 108
- Joined: Sat Apr 20, 2013 11:49 am
- Location: Oklahoma
Re: still here
Good to see you, Amy! I've been wondering about you. Are you making any progress with the thyroid?
_________________
Machine: PR System One REMStar 60 Series Auto CPAP Machine |
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear |
- John from Brookston
- Posts: 248
- Joined: Sun Feb 24, 2013 10:07 pm
- Location: Brookston, Indiana
Re: still here
Hey! Good to see you again!
_________________
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear |
Additional Comments: BiPAP, running 19/13, no ramp. No meds, have a True-Blue nasal mask, too, and a Quattro for stuffy-nose nights. |
Big fat guy who's diabetic, on HRT, and now a heart attack survivor as well as having OSA (boy, I sure won the genetic rodeo, din't I?). Ham Radio operator and I have a black tomcat named "Bart" who looks like an old prize fighter.
Re: still here
still struggling with the Graves. I get my first follow up bloodwork next week and then see the doc on the 30th. I run this roller coaster of scary high heart rate, take the meds, blood pressure drops too low. Stop meds, heart rate okay for 2 days then skyrockets. Emotions still out of control and bad muscle weakness. I was hoping for more improvement by now. Not sure why because they told me its a slow process. trying to keep my attitude positive. Just do what I can when I can. Thanks for asking xoxoxo
_________________
Mask: AirFit™ N20 Nasal CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Re: still here
Should I even try the Elan out? Or just send it right back for the Advanced?[/quote]
Glad to know you are still hang in there through everything.
I tried the Elan. I loved it. I was one of the ones that couldn't get it to keep a seal and sending it back was a difficult choice for me just because it was so comfortable. I hope it works out for you and no way to know till you try it.
Glad to know you are still hang in there through everything.
I tried the Elan. I loved it. I was one of the ones that couldn't get it to keep a seal and sending it back was a difficult choice for me just because it was so comfortable. I hope it works out for you and no way to know till you try it.
_________________
Machine: PR System One REMStar 60 Series Auto CPAP Machine |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Additional Comments: pressure 6cm to 10cm |
DJ