Quattro FX issue?
Quattro FX issue?
Hi, all,
I have found the Quattro FX to be the best mask for me (woo hoo!), but there is one issue I'm having: The interface does not always stay put in the slots on the main part of the mask. This connection is designed differently than the one on the regular Quattro - my guess is to save money -- but the two partially separate nearly every night, and I awaken in the night with a big leak. Anyone else having this problem?
I have found the Quattro FX to be the best mask for me (woo hoo!), but there is one issue I'm having: The interface does not always stay put in the slots on the main part of the mask. This connection is designed differently than the one on the regular Quattro - my guess is to save money -- but the two partially separate nearly every night, and I awaken in the night with a big leak. Anyone else having this problem?
Re: Quattro FX issue?
I find I have more problems with it if I do the "pull back, allow to inflate, and lower to seal" than if I use the rock method described to put it in place. But I agree the cushion does separate easily from the frame.
_________________
Mask: AirFit™ F10 Full Face Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Machine: S9 VPAP Adapt (eASV) 36037 |
Mode: ASVAuto, Min EPAP: 4, Max EPAP: 15, Min PS: 3, Max PS: 15, Ramp: Off - Original Titration: 18
- Ms.Snuffleupagus
- Posts: 281
- Joined: Sun Nov 22, 2009 6:28 pm
- Location: Canada
Re: Quattro FX issue?
I had this problem with the small Quattro but not with the medium. The medium cushion stays very snugly in place. I wonder if the problem with the cushion separating from the mask frame was due to a defect in the cushion. Anyone notice if the problem disappears or persists once they replace their cushions?
Re: Quattro FX issue?
I HATE having to take a mask apart to clean it!!!! Grrrrr. Have had an intermittent problem w/the doggone separation you mention. Fortunately, not too often. Especially IF I remember to see that it is fitted in all around before donning my Quattro FX for the night. I'm using the Small Quattro FX.
_________________
Mask: Quattro™ FX Full Face CPAP Mask with Headgear |
Additional Comments: PR SystemOne BPAP Auto w/Bi-Flex & Humidifier - EncorePro 2.2 Software - Contec CMS-50D+ Oximeter - Respironics EverFlo Q Concentrator |
Women are Angels. And when someone breaks our wings, we simply continue to fly.....on a broomstick. We are flexible like that.
My computer says I need to upgrade my brain to be compatible with its new software.
My computer says I need to upgrade my brain to be compatible with its new software.
Re: Quattro FX issue?
I use the small, and a medium would be too big. I use the Xsmall with the regular Quattro.
Perhaps taping it is the answer, but what a bother! Or washing the cushion and frame together, but that probably means removing the straps, as they won't dry as fast. Then they will have to be adjusted each time I wash the mask. Right now I'm using the appropriate wipes to clean the cushion, so I don't have to keep taking the two apart.
Resmed, are you listening?
Perhaps taping it is the answer, but what a bother! Or washing the cushion and frame together, but that probably means removing the straps, as they won't dry as fast. Then they will have to be adjusted each time I wash the mask. Right now I'm using the appropriate wipes to clean the cushion, so I don't have to keep taking the two apart.
Resmed, are you listening?
- Ms.Snuffleupagus
- Posts: 281
- Joined: Sun Nov 22, 2009 6:28 pm
- Location: Canada
Re: Quattro FX issue?
Bur I wonder if some of the cushions are defective regardless of size. Has anyone replaced theirs and had the problem disappear?
Re: Quattro FX issue?
Before I got a Quattro FX and even joined this forum, I did a lot of searching through posts. In the thread below on Page 6, snoozysue talks about a possible defect.
viewtopic.php?f=1&t=59062&st=0&sk=t&sd=a&start=75
As for me I have a medium and have had no problems. It is the best mask I have ever had. I always caveat that I don't use the FX headgear as I think it has the tendancy to pull the mask up along the nose instead of back. I just use elastic straps. Only issue is the top strap sometimes rides on my ears in the crease where eyeglasses are placed and it gets a little irritated.
John
viewtopic.php?f=1&t=59062&st=0&sk=t&sd=a&start=75
As for me I have a medium and have had no problems. It is the best mask I have ever had. I always caveat that I don't use the FX headgear as I think it has the tendancy to pull the mask up along the nose instead of back. I just use elastic straps. Only issue is the top strap sometimes rides on my ears in the crease where eyeglasses are placed and it gets a little irritated.
John
_________________
Machine: ResMed AirCurve 10 ASV Machine with Heated Humidifier |
Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear |
AHI: 2.5
Central: 1.7
Obstructive: 0.3
Hypopnea: 0.5
Pressure: 6.0-8.0cm on back with cervical collar.
Compliance: 15 Years
Central: 1.7
Obstructive: 0.3
Hypopnea: 0.5
Pressure: 6.0-8.0cm on back with cervical collar.
Compliance: 15 Years
- chunkyfrog
- Posts: 34545
- Joined: Mon Jul 12, 2010 5:10 pm
- Location: Nowhere special--this year in particular.
Re: Quattro FX issue?
I noticed the cushion spontaneously separated from the frame the first night--But that wasn't the main reason why I returned it.
Resmed apparently thinks my face should be flatter than it is. They can't comprehend a face as cute as mine, I guess.
Resmed apparently thinks my face should be flatter than it is. They can't comprehend a face as cute as mine, I guess.
_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Airsense 10 Autoset for Her |