Design Student Honours CPAP Survey
-
- Posts: 4
- Joined: Thu May 09, 2019 5:20 pm
Design Student Honours CPAP Survey
Hi
My name is Kyle Smith from the Queensland University of Technology School of Design, Creative Industries Faculty and I’m doing a research project as part of my honours about the experiences of CPAP use.
If you’d like to help me in this study I’m looking for respiratory clinicians and patients with varying levels of experience with CPAP to complete a 10 minute online questionnaire. Participants need to be over 18 years of age.
Please review this information sheet before you begin: https://bit.ly/2WAIVyC
If you are interested in completing the survey, please follow this link: https://forms.gle/Q3Q4uG1gdj8VdKnd8
If you have any questions, please message me directly.
Please note that this study has been approved by the QUT Human Research Ethics Committee (approval number 1800000355).
Many thanks for helping me out with this.
My name is Kyle Smith from the Queensland University of Technology School of Design, Creative Industries Faculty and I’m doing a research project as part of my honours about the experiences of CPAP use.
If you’d like to help me in this study I’m looking for respiratory clinicians and patients with varying levels of experience with CPAP to complete a 10 minute online questionnaire. Participants need to be over 18 years of age.
Please review this information sheet before you begin: https://bit.ly/2WAIVyC
If you are interested in completing the survey, please follow this link: https://forms.gle/Q3Q4uG1gdj8VdKnd8
If you have any questions, please message me directly.
Please note that this study has been approved by the QUT Human Research Ethics Committee (approval number 1800000355).
Many thanks for helping me out with this.
Regards,
Kyle Smith
Bachelor of Design – Honours Student
Kyle Smith
Bachelor of Design – Honours Student
Re: Design Student Honours CPAP Survey
Is the study funded by a particuar company that makes Cpaps?
Are they getting free marketing info through your work?
Do you get paid in some way for doing the work?
Are they getting free marketing info through your work?
Do you get paid in some way for doing the work?
Last edited by Julie on Fri May 10, 2019 10:10 am, edited 1 time in total.
- ChicagoGranny
- Posts: 15078
- Joined: Sun Jan 29, 2012 1:43 pm
- Location: USA
Re: Design Student Honours CPAP Survey
I have completed the survey. Good luck with your project.
(You should ignore the nitwit comments some members will make here. They do it all the time.)
- Dog Slobber
- Posts: 4158
- Joined: Thu Feb 15, 2018 2:05 pm
- Location: Ontario, Canada
Re: Design Student Honours CPAP Survey
Completed.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P30i Nasal Pillow CPAP Mask with Headgear Starter Pack |
Additional Comments: Min EPAP: 8.2, Max IPAP: 25, PS:4 |
-
- Posts: 163
- Joined: Thu May 09, 2019 7:29 am
- Location: Washington, USA
Re: Design Student Honours CPAP Survey
There was a typo - contected instead of contacted - toward the end of the survey. Obviously not a big deal of course. I would have liked to have seen an open ended “anything else you would like to say?” box at the end also.
_________________
Machine: ResMed AirCurve 10 ASV Machine with Heated Humidifier |
Mask: ResMed AirFit F30i Full Face CPAP Mask with Headgear |
- Jay Aitchsee
- Posts: 2936
- Joined: Sun May 22, 2011 12:47 pm
- Location: Southwest Florida
Re: Design Student Honours CPAP Survey
done
_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Additional Comments: S9 Auto, P10 mask, P=7.0, EPR3, ResScan 5.3, SleepyHead V1.B2, Windows 10, ZEO, CMS50F, Infrared Video |
-
- Posts: 547
- Joined: Thu Nov 05, 2015 5:43 am
Re: Design Student Honours CPAP Survey
Completed.
- katestyles
- Posts: 610
- Joined: Sun Jan 06, 2019 9:08 am
Re: Design Student Honours CPAP Survey
done
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: Bleep DreamPort CPAP Mask Solution |
Additional Comments: Back up mask - anything in the drawer |
- babydinosnoreless
- Posts: 2355
- Joined: Fri Nov 02, 2018 2:53 pm
Re: Design Student Honours CPAP Survey
Done
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ N20 Nasal CPAP Mask with Headgear |
Re: Design Student Honours CPAP Survey
done
_________________
Machine: AirSense 11 Autoset |
Mask: Bleep DreamPort CPAP Mask Solution |
Additional Comments: AirMini for travel, with Eclipse/Halos. OSCAR software. |
Mask: Bleep Eclipse/Halos
Machine: ResMed AirSense 11 AutoSet
Machine: ResMed AirSense 11 AutoSet
Re: Design Student Honours CPAP Survey
Completed.
Resmed AirSense 10 Autoset for her w/humid air/heated Humidifier
Bleep/P10
Bleep/P10
Re: Design Student Honours CPAP Survey
Completed
That's a pretty good survey for an honors student. I know. I work with them.
That's a pretty good survey for an honors student. I know. I work with them.

_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: pressure 9.6 - 20. No ramp. Exhalation relief 3. Humidity 4. |
I don't want to sleep like a baby. I want to sleep like my husband. Resmed AirSense 10 for her. Pillows. Humidity 4.
Re: Design Student Honours CPAP Survey
I completed the survey, and good luck with your project.
_________________
Machine: ResMed AirCurve 10 ASV Machine with Heated Humidifier |
Mask: Evora Full Face Mask - Fitpack |
Additional Comments: AirCurve 10 ASV, Oscar V1.0.1-r-1 |
US Navy Retired 1973,AirCurve 10 ASV, Mode: ASV Auto, Min EPAP: 7.2, Max EPAP: 15.0, Min PS:4.0, Max PS: 15.0, Mask ResMed Airtouch F20, Backup: (2) AirCurve 10 ASV
Re: Design Student Honours CPAP Survey
Done
_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Heated Tubing; mask sometimes is TAP PAP mask; now P10 nasal pillows; use Sleepyhead software |
APAP 9-12
-
- Posts: 4
- Joined: Thu May 09, 2019 5:20 pm
Re: Design Student Honours CPAP Survey
No, this is my own work and technically only funded by me.
It is for my final year as part of my honours project.
Regards,
Kyle Smith
Bachelor of Design – Honours Student
Kyle Smith
Bachelor of Design – Honours Student