Wrong Usage Time

[robbob2112]

You have to get it via email


Please follow these email instructions exactly:

If you would like one of the manuals listed above, please send an email to: apneaboard@gmail.com and put "Setup Manual" (without the quotes) in the subject line. Then, let us know in the body of your email which of the listed manuals you would like us to email to you. It is best if you copy the exact manual name from the above list and paste it into your email to make sure you receive the correct manual.

This is the manual name

ResMed AirCurve 10 ASV

[Horrorbiz78]

I just sent a email.

I really appreciate your help, and all the info you have got me.

[Horrorbiz78]

I got the Clinical manual, really interesting info.

Do you have yours setup for SmartStart?

[vandownbytheriver]

Why did I have to Erase Data in order to 'fall back' then?

You didn't have to.

It's perfectly acceptable to move the clock back, so long as you don't move back into a session with data, or a previous (ResMed) day with data.

So... just wait a day? Is that what you're suggesting? I'm suggesting that when you get the 'cannot change clock' message you pull the card, erase data, then change the clock, then put the card back in. Do you disagree with that?

Perhaps one day, you'll see one of your YouTube idols do a video on howto change the clock.

Here it is, Gobbler... he uses Erase Data. You really don't want me replying to you, do you?

https://www.youtube.com/watch?v=VKUyF2erNYU

[Pugsy]

So... just wait a day? Is that what you're suggesting? I'

No...not a day. Usually just a few hours is enough.
It's why I tell people who want to adjust the clock for DST changes to do the changes in the evening and not the morning so there is less chance that there will already be data in the session that prevents the clock from going back.

BTW....no more snarky comments. They aren't helpful at all.

[Dog Slobber]

So... just wait a day? Is that what you're suggesting? I'm suggesting that when you get the 'cannot change clock' message you pull the card, erase data, then change the clock, then put the card back in. Do you disagree with that?

Perhaps one day, you'll see one of your YouTube idols do a video on howto change the clock.

Here it is, Gobbler... he uses Erase Data. You really don't want me replying to you, do you?

https://www.youtube.com/watch?v=VKUyF2erNYU

This post demonstrates exactly why you have no credibility here. You were wrong, and instead of just acknowledging you were wrong and learning something, you lie about it then move the goal posts.

When Pugsy told you that setting the time backwards doesn't require erasing data, your response was, "Why did I have to Erase Data in order to 'fall back' then?".

She (and I) then explained the circumstances that it could be changed.

Now, you've moved the goal posts, you said nothing that resembles, "when you get the 'cannot change clock' message you pull the card, erase data, then change the clock, then put the card back in". Nothing. In fact asking why you *had* to erase the data suggests, you didn't know the circumstances when you could set the time back.

And Lanky's video is wrong. He, like you was obviously unaware of the circumstances where you can move the data back. As he stated you could not set the time backwards.

Both Pugsy and and I knew the circumstances, because we aren't Jason/Nick sycophants. We don't just accept what they say as absolute truth. We scrutinise, we experiment, we learn.

And no, I didn't suggest anything at all suggesting one should wait a day. Nice strawman, liar.

But if you're interested the two most common reasons the clocks need to be set back is Daylight/Standard time adjustment, and time zone adjustment because a device came factory set from a different time zone.

Typically, both of the above, won't require an adjustment of more than 4 hours. So the preferred solution is *NOT* to erase data, the preferred solution is to simply wait until after 1PM to "fall-back", or 2..4PM to adjust for time zone.

But more importantly, people should understand how these things work, which you appear to have a problem with. You would rather lie and obfuscate the issue, instead of a simple acknowledging you didn't know something or were wrong.

[vandownbytheriver]

So... just wait a day? Is that what you're suggesting? I'

No...not a day. Usually just a few hours is enough.
It's why I tell people who want to adjust the clock for DST changes to do the changes in the evening and not the morning so there is less chance that there will already be data in the session that prevents the clock from going back.

Rather than just get it done? Whatever...

BTW....no more snarky comments. They aren't helpful at all.

But messing with screen name perfectly fine, right?

[Pugsy]

messing with screen name perfectly fine, right?

It kinda depends on what is done to mess with the screen name.

Besides.....last time I checked 2 wrongs don't make a right.
And with that comment....if you don't have anything else to actually help the OP here and not hijack this thread anymore...how about you just be a big boy and move on.
Your point of view has been clearly stated by yourself and there's no need for further snarky crap.

If you can't be helpful...how about just moving on?

Further off topic snarky crap will result in offending post(s) being promptly removed.

[Horrorbiz78]

Here’s my Data from sleep HQ: it doesn’t have this morning’s data:

https://sleephq.com/public/teams/share_ ... c3342bb45c

[vandownbytheriver]

Here’s my Data from sleep HQ: it doesn’t have this morning’s data:

https://sleephq.com/public/teams/share_ ... c3342bb45c

Looks like it's doing what it's supposed to... you only posted 35min, is that all you managed?

[Horrorbiz78]

No I used for more than that

[vandownbytheriver]

No I used for more than that

OK... that's all the link shows. You're the one on third shift right? Your days will split at noon... probably with big gaps in them.

[robbob2112]

I got the Clinical manual, really interesting info.

Do you have yours setup for SmartStart?

No, I dislike smart start because it also implies smart stop. I just push the button on and push it again when I want it off. The wind blowing is noisy enough to disturb my wife. Besides I have it where if she hears a leak she will nudge me awake enough to fix it.

[Weld3z]

New to ResMed, AirCurve 10 VAuto with 4G
What about when traveling?
Does it change the time automatically or do I do it manually?
I mean a different country with another telecom provider.

Thank you

[Pugsy]

New to ResMed, AirCurve 10 VAuto with 4G
What about when traveling?
Does it change the time automatically or do I do it manually?
I mean a different country with another telecom provider.

The AirCurve 10 has a clock you can set the time. It does NOT do anything time related automatically.

Be very careful if you go changing the clock. The machine has some limitations when it comes to going backwards in time and sometimes it won't let you go backwards because there is already data stored within that time frame. It goes forwards easily but sometimes going backwards creates a problem. Not always but fairly often. Just ask the people who have problems every spring and fall when changing to DST or out of DST.