Respronics system one
-
- Posts: 409
- Joined: Wed Aug 13, 2014 4:48 pm
- Contact:
Respronics system one
Anyone know where I can get a Connell knob for a system one. My wife's stopped working
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: Quattro™ FX Full Face CPAP Mask with Headgear |
Re: Respronics system one
If you mean Control Knob and
You have a 60 series machine,
then https://www.cpap.com/productpage/pr-cpa ... ob-ui.html
It may fit a Series 50 but I can't tell from the web page.
But, it may be that its not the knob but the switch the knob is on.
Then Accurate Biomed Services
(800) 376-5660
100 North 17th Street
Bethany MO 64424
United States of America
You have a 60 series machine,
then https://www.cpap.com/productpage/pr-cpa ... ob-ui.html
It may fit a Series 50 but I can't tell from the web page.
But, it may be that its not the knob but the switch the knob is on.
Then Accurate Biomed Services
(800) 376-5660
100 North 17th Street
Bethany MO 64424
United States of America
_________________
Mask: Oracle HC452 Oral CPAP Mask |
Humidifier: DreamStation Heated Humidifier |
Additional Comments: EverFlo Q 3.0 Liters O2 PR DSX900 ASV |
Oracle 452 Lessons Learned Updated
DSX900 AutoSV with HC150 extra humidifier and Hibernite heated hose
Settings: EPAP Min-10.0, EPAP Max-17, PS Min-3, PS Max-10, Max Pressure-20, Rate-Auto, Biflex-1.
Sleepyhead and Encore Pro 2.21.
DSX900 AutoSV with HC150 extra humidifier and Hibernite heated hose
Settings: EPAP Min-10.0, EPAP Max-17, PS Min-3, PS Max-10, Max Pressure-20, Rate-Auto, Biflex-1.
Sleepyhead and Encore Pro 2.21.
Re: Respronics system one
I have a system one that is for parts. It is a 50 series
-
- Posts: 409
- Joined: Wed Aug 13, 2014 4:48 pm
- Contact:
Re: Respronics system one
Jds74 yeah I don't need the plastic knob I need the multi switch under the knob
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: Quattro™ FX Full Face CPAP Mask with Headgear |
-
- Posts: 409
- Joined: Wed Aug 13, 2014 4:48 pm
- Contact:
Re: Respronics system one
Av junkie it it's parts for a 50 series
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: Quattro™ FX Full Face CPAP Mask with Headgear |
-
- Posts: 409
- Joined: Wed Aug 13, 2014 4:48 pm
- Contact:
Re: Respronics system one
how are you at desoldering? the pn of that rotary encoder may be printed on the side or bottom.
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Re: Respronics system one
I have the complete main board from a 50 seried. I'll send it out to you Friday. the machine was giving an error message.... (A dud I bought from craigslist.)
Re: Respronics system one
So how do you know its the switch? It won't power on or turn off?
-
- Posts: 409
- Joined: Wed Aug 13, 2014 4:48 pm
- Contact:
Re: Respronics system one
The switch peers on and turns off the rotary part of the switch doesn't work. It rd sporadic then finally stopped
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: Quattro™ FX Full Face CPAP Mask with Headgear |
-
- Posts: 409
- Joined: Wed Aug 13, 2014 4:48 pm
- Contact:
Re: Respronics system one
I'm not great at soldering but I get by. There are 7 places that the switch is soldered to the boardpalerider wrote:how are you at desoldering? the pn of that rotary encoder may be printed on the side or bottom.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: Quattro™ FX Full Face CPAP Mask with Headgear |
Re: Respronics system one
unless the new board you're getting sent works for your machine (heck, it might be an upgrade!) you'll have to remove the old encoder and put the new one in. removing the bad one isn't too hard, you can just clip it off, but you have to use a solder sucker or solder wick to desolder the new one without damaging it.Greg Riddle wrote:I'm not great at soldering but I get by. There are 7 places that the switch is soldered to the boardpalerider wrote:how are you at desoldering? the pn of that rotary encoder may be printed on the side or bottom.
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
- grayghost4
- Posts: 1554
- Joined: Wed Aug 20, 2014 6:52 pm
- Location: Norther Illinois
- Contact:
Re: Respronics system one
might just be dirty , try cleaning it with an air-sol can of electrical cleaner ... get from radio shack
If you're not part of the solution you're just scumming up the bottom of the beaker!
Get the Clinicians manual here : http://apneaboard.com/adjust-cpap-press ... tup-manual
Get the Clinicians manual here : http://apneaboard.com/adjust-cpap-press ... tup-manual
-
- Posts: 409
- Joined: Wed Aug 13, 2014 4:48 pm
- Contact:
Re: Respronics system one
I tried the cleaner and it didn't work. I'm waiting on a board from av junkie. I think there both the same machine
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: Quattro™ FX Full Face CPAP Mask with Headgear |