I recently got an AirFit F20 to eliminate the mouth breathing I've been doing with just nasal pillows, but I've run into a weird problem. The hose attaches to a swivel which attaches to the front of the mask. This swivel has quick release connectors which make it fall off the front of the mask at the slightest touch. If I roll over even slightly wrong, it falls off and either wakes me up or worse I don't notice for hours.
This is what ends up falling off the front:
It's not the hose detaching from the connector.
Has anyone else encountered this? Is this mask just completely not suitable for side sleepers?
AirFit F20 front falling off?
-
- Posts: 13
- Joined: Wed Apr 03, 2024 6:58 pm
AirFit F20 front falling off?
_________________
Machine: Airsense 10 Card to Cloud |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
- ChicagoGranny
- Posts: 14946
- Joined: Sun Jan 29, 2012 1:43 pm
- Location: USA
AirFit F20 hose connector detaches during use
This mask gets high reviews. The problem you mentioned does not seem to appear in any of the 460 reviews at the bottom of this page - https://www.cpap.com/productpage/resmed ... k-headgear
Could your attachment have been damaged?
You might want to edit your subject line as I did above.
Could your attachment have been damaged?
You might want to edit your subject line as I did above.
"It's not the number of breaths we take, it's the number of moments that take our breath away."
Cuando cuentes cuentos, cuenta cuántas cuentos cuentas.
Cuando cuentes cuentos, cuenta cuántas cuentos cuentas.
-
- Posts: 13
- Joined: Wed Apr 03, 2024 6:58 pm
Re: AirFit F20 front falling off?
If it was damaged, it was before I even got it, as this has happened the entire time I've had it.
In response to the subject: https://www.youtube.com/watch?v=3m5qxZm_JqM
In response to the subject: https://www.youtube.com/watch?v=3m5qxZm_JqM
_________________
Machine: Airsense 10 Card to Cloud |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Re: AirFit F20 front falling off?
Do you hear the click when you connect the swivel to the mask?
Just for testing sake: try to connect / disconnect it before you connect the host to the swivel, see if you can get a firm connection that you can swivel about safely. If you can, repeat the movement a few time without the hose, and then try it with the hose connected.
If you can't get a firm connection after the mechanism clicks into place, no matter how much you try, then it must have been damaged.
https://youtu.be/-MjCmPEcTm0?t=25
Just for testing sake: try to connect / disconnect it before you connect the host to the swivel, see if you can get a firm connection that you can swivel about safely. If you can, repeat the movement a few time without the hose, and then try it with the hose connected.
If you can't get a firm connection after the mechanism clicks into place, no matter how much you try, then it must have been damaged.
https://youtu.be/-MjCmPEcTm0?t=25
_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Machine: Resmed AirSense10 for Her with Climateline heated hose ; alternating masks. |
And now here is my secret, a very simple secret; it is only with the heart that one can see rightly, what is essential is invisible to the eye.
Antoine de Saint-Exupery
Good advice is compromised by missing data
Forum member Dog Slobber Nov. 2023
Antoine de Saint-Exupery
Good advice is compromised by missing data
Forum member Dog Slobber Nov. 2023
-
- Posts: 13
- Joined: Wed Apr 03, 2024 6:58 pm
Re: AirFit F20 front falling off?
It clicks into place just fine, and if I just attempt to pull it straight off the mask it stays attached just fine. However, if I rotate my hand at all while pulling, it immediately comes off.
It looks like one of the tabs meant to hold it on does not fully seat. I've emailed resmed about it, but I'm guessing they're going to tell me to contact where I bought it from.
It looks like one of the tabs meant to hold it on does not fully seat. I've emailed resmed about it, but I'm guessing they're going to tell me to contact where I bought it from.
_________________
Machine: Airsense 10 Card to Cloud |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
- ChicagoGranny
- Posts: 14946
- Joined: Sun Jan 29, 2012 1:43 pm
- Location: USA
Re: AirFit F20 front falling off?
Exactly. In the US, ResMed does not deal directly with users. There are probably regulations that won't permit it.NoisyBreathing wrote: ↑Tue Jul 16, 2024 6:37 pmI've emailed resmed about it, but I'm guessing they're going to tell me to contact where I bought it from.
"It's not the number of breaths we take, it's the number of moments that take our breath away."
Cuando cuentes cuentos, cuenta cuántas cuentos cuentas.
Cuando cuentes cuentos, cuenta cuántas cuentos cuentas.
Re: AirFit F20 front falling off?
Not only ResMed and not only in the US. There are other companies too that will refer users of their merchandise to the local dealers.ChicagoGranny wrote: ↑Wed Jul 17, 2024 4:46 amExactly. In the US, ResMed does not deal directly with users. There are probably regulations that won't permit it.NoisyBreathing wrote: ↑Tue Jul 16, 2024 6:37 pmI've emailed resmed about it, but I'm guessing they're going to tell me to contact where I bought it from.
_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Machine: Resmed AirSense10 for Her with Climateline heated hose ; alternating masks. |
And now here is my secret, a very simple secret; it is only with the heart that one can see rightly, what is essential is invisible to the eye.
Antoine de Saint-Exupery
Good advice is compromised by missing data
Forum member Dog Slobber Nov. 2023
Antoine de Saint-Exupery
Good advice is compromised by missing data
Forum member Dog Slobber Nov. 2023