DeVilbiss Intellipap questions

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
Hawthorne
Posts: 3972
Joined: Tue Oct 19, 2004 4:46 am
Location: London Ontario -Canada

Re: DeVilbiss Intellipap questions

Post by Hawthorne » Sat Jun 15, 2013 6:47 am

My pressure has never ever gotten to my top setting of 14 cm. It is usually 11 cm or 11.5 cm and, rarely, 12 cm.

I wonder what other settings the people who have this runaway pressure situation. What is your flex setting and what is your eround and iround setting?

I'm not sure this would make a difference but I am trying to figure out why this happens on some people's Intellipaps.

_________________
Machine: DreamStation Auto CPAP Machine
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
Humidifier: DreamStation Heated Humidifier
Additional Comments:  Backups- FX Nano masks. Backup machine- Airmini auto travel cpap
Top
tetragon
Posts: 539
Joined: Wed Oct 19, 2011 4:06 am
Location: Toronto, ON
Contact:
Contact tetragon

Re: DeVilbiss Intellipap questions

Post by tetragon » Sat Jun 15, 2013 6:11 pm

I'm using a flex of 3, with eround of 5 and iround of 3.

_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear
Additional Comments: Software: SleepyHead, loosely following HEAD
Top
BobHale
Posts: 43
Joined: Sun Aug 08, 2010 8:35 pm
Location: Plainsboro, NJ

Re: DeVilbiss Intellipap questions

Post by BobHale » Sun Jun 16, 2013 6:13 am

I found the Intellipap auto overly sensitive detecting hypopneas. The default setting is a 50% reduction in flow for 10 seconds. My AHI was 9 to 12 nearly all hypopneas.
I found my average respiration rate is 14 per minute or a breath every 4.2 seconds. My ventilation varies from 8 to 16 liters per minute.
I changed the hypopnea settings to 60% reduction for 16 seconds. AHI is now in the 4 to 7 range and the pressure profile is similar to my S9.

_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear
Additional Comments: Travel Z2 Auto. Settings 9 - 15
Top
goose egg
Posts: 2
Joined: Sat May 17, 2014 5:22 pm

Re: DeVilbiss Intellipap questions

Post by goose egg » Sat May 17, 2014 5:33 pm

I accidentally changed the language of my DV54D to Spanish. Please tell me how to switch this back to English. What combination of buttons should I press?
Top
User avatar
Rustsmith
Posts: 110
Joined: Sat Sep 28, 2013 3:34 pm

Re: DeVilbiss Intellipap questions

Post by Rustsmith » Sun May 18, 2014 7:02 am

Goose Egg, to enter the menu that has the language choices, press Ramp and Down (continue holding them down) and then press On/OFF (so you have three buttons down at the same time). This enters the Clinician Menu and the first choice is language. Press the up or down arrows until it returns to English. You can then press On/Off to exit the menu or continue on the see the other adjustments available in this series of menus.

_________________
Mask: SleepWeaver Anew™ Full Face Mask with Headgear
Additional Comments: Pressure 9-12, Sleepyhead V9.3-0
Top
goose egg
Posts: 2
Joined: Sat May 17, 2014 5:22 pm

Re: DeVilbiss Intellipap questions

Post by goose egg » Sun May 18, 2014 8:45 pm

Rustsmith wrote:Goose Egg, to enter the menu that has the language choices, press Ramp and Down (continue holding them down) and then press On/OFF (so you have three buttons down at the same time). This enters the Clinician Menu and the first choice is language. Press the up or down arrows until it returns to English. You can then press On/Off to exit the menu or continue on the see the other adjustments available in this series of menus.
I've been through the online (PDF) documentation at the DeVilbiss website and I don't believe there is anywhere online that I could get this assistance than here ImageImageImage Thank you, Rustsmith
Top


Return to “CPAP and Sleep Apnea Message Board”