I need Help w/disassembly of Airfit F10 mask please

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
discogypsy
Posts: 3
Joined: Sun May 22, 2016 3:17 pm
Location: Seattle USA

I need Help w/disassembly of Airfit F10 mask please

Post by discogypsy » Sun May 22, 2016 3:53 pm

I watched the video on how to disassemble and clean my Airfit F10 full face mask size small,but am still unable to pull the mask and frame apart from each other. Any advise ?

_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier
Mask: AirFit™ F10 For Her Full Face Mask with Headgear
Top
User avatar
englandsf
Posts: 1016
Joined: Thu Jul 10, 2014 6:17 pm
Location: Austin TX

Re: I need Help w/disassembly of Airfit F10 mask please

Post by englandsf » Sun May 22, 2016 3:56 pm

Push up on the bottom edge/clip of the mask as you push it out of the frame. It's quite robust so no need to be very gentle. You must disengage the latch or it won't come out...

_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Sleepyhead SW. NeilMed and Alkalol Nasal rinses. Veramyst. AutoPAP 11-20 cms. Started June '14, untreated AHI 31-38, with PAP around 1.
Top
User avatar
Sir NoddinOff
Posts: 4190
Joined: Mon May 14, 2012 5:30 pm
Location: California

Re: I need Help w/disassembly of Airfit F10 mask please

Post by Sir NoddinOff » Sun May 22, 2016 4:00 pm

Grab either stub/post that the headgear loops around and pull the tip of that stub/post it out a little bit (gentle pressure is enough)... you'll note that both the cushion shell and the frame pop apart easily if you do that

_________________
Mask: AirFit™ F10 Full Face Mask with Headgear
Additional Comments: Sleepyhead software v.0.9.8.1 Open GL and Encore Pro v2.2.
Last edited by Sir NoddinOff on Sun May 22, 2016 4:12 pm, edited 1 time in total.
I like my ResMed AirFit F10 FFM - reasonably low leaks for my ASV therapy. I'm currently using a PR S1 AutoSV 960P Advanced. I also keep a ResMed S9 Adapt as backup. I use a heated Hibernite hose. Still rockin' with Win 7 by using GWX to stop Win 10.
Top
User avatar
discogypsy
Posts: 3
Joined: Sun May 22, 2016 3:17 pm
Location: Seattle USA

Re: I need Help w/disassembly of Airfit F10 mask please

Post by discogypsy » Sun May 22, 2016 4:06 pm

Yay It pope out!! Thanks for your help

_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier
Mask: AirFit™ F10 For Her Full Face Mask with Headgear
Top
User avatar
Sir NoddinOff
Posts: 4190
Joined: Mon May 14, 2012 5:30 pm
Location: California

Re: I need Help w/disassembly of Airfit F10 mask please

Post by Sir NoddinOff » Sun May 22, 2016 4:12 pm

Like a lot of stuff in life, once you learn the "simple" trick it's easy. That said, sometimes learning the "simple" trick can take awhile (it took me a day or two)

_________________
Mask: AirFit™ F10 Full Face Mask with Headgear
Additional Comments: Sleepyhead software v.0.9.8.1 Open GL and Encore Pro v2.2.
I like my ResMed AirFit F10 FFM - reasonably low leaks for my ASV therapy. I'm currently using a PR S1 AutoSV 960P Advanced. I also keep a ResMed S9 Adapt as backup. I use a heated Hibernite hose. Still rockin' with Win 7 by using GWX to stop Win 10.
Top
Violet West
Posts: 125
Joined: Mon Mar 28, 2016 1:52 pm
Location: Tex-Mex-NM

Re: I need Help w/disassembly of Airfit F10 mask please

Post by Violet West » Sun May 22, 2016 8:44 pm

Don't feel bad -- I don't have that mask, but I got to say that puttling my headset together the first few times was quite challenging, as I have poor directional ability. But I figured it out!

_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear
Top


Return to “CPAP and Sleep Apnea Message Board”