Are you on a Bi-Level machine and if so why?
Are you on a Bi-Level machine and if so why?
It is gradually coming back to me how I got started on a Bi-level machine.
I was an active member of this forum about 10+ years ago until I thought I was sorted.
I remember backchannel discussion with a forum user (IIRC based in Seattle) who kindly took a look at some of my data, as I managed to install Encore Pro on my old Win XP computer. I may also have sent a scan of sleep study results. Again, IIRC, she had some kind of medical expertise in apnea and said I needed a Bi-Level machine. I am 99 per cent sure this was because I was having central so this suggests my centrals are NOT caused by BiPAP therapy.
This does not rule out BiPAP causing some additional centrals of course but I think it is not the sole cause, if at all.
I was an active member of this forum about 10+ years ago until I thought I was sorted.
I remember backchannel discussion with a forum user (IIRC based in Seattle) who kindly took a look at some of my data, as I managed to install Encore Pro on my old Win XP computer. I may also have sent a scan of sleep study results. Again, IIRC, she had some kind of medical expertise in apnea and said I needed a Bi-Level machine. I am 99 per cent sure this was because I was having central so this suggests my centrals are NOT caused by BiPAP therapy.
This does not rule out BiPAP causing some additional centrals of course but I think it is not the sole cause, if at all.
Machine: Philips Respironics BiPAP C Series.
Mask: Respironics Comfort Gel Nasal Mask.
Pressure 12-18.
Mask: Respironics Comfort Gel Nasal Mask.
Pressure 12-18.
Re: Are you on a Bi-Level machine and if so why?
Many because they equate more costly with better treatment, only true if you need it. In the meantime playing around doesn't help your treatment. Jim
Use data to optimize your xPAP treatment!
"The art of medicine consists in amusing the patient while nature cures the disease." Voltaire
"The art of medicine consists in amusing the patient while nature cures the disease." Voltaire
- Okie bipap
- Posts: 3566
- Joined: Thu Oct 15, 2015 4:14 pm
- Location: Central Oklahoma
Re: Are you on a Bi-Level machine and if so why?
My wife and I were both put on bi-level machines because we did not do well with CPAPs. We both started off with high pressure that needed more pressure support than the CPAP could provide.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: Evora Full Face Mask - Fitpack |
Additional Comments: IPAP 20-25, ps 4, OSCAR software |
Growing old is mandatory, but growing up is optional.
Re: Are you on a Bi-Level machine and if so why?
I have Complex Apnea.. CPAP and Auto BiPAP wouldn't do it for me so was switched to BiLevel ASV and it is amazing ... It just works while others didn't come close to getting to those centrals. Also regular BiPAP made the AHI through the roof upwards to 50+ a night ... Now I am sitting under 5 most nights 0.5-1 ...
_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Additional Comments: ResMed S9 VPAP ST |
Last edited by BTS on Tue Apr 24, 2018 11:52 am, edited 1 time in total.
Re: Are you on a Bi-Level machine and if so why?
I am on a bipap because I started at 20/16 pressure, too high for a cpap.
Re: Are you on a Bi-Level machine and if so why?
I'm on bilevel, but it's because I was looking for an autoset, and came across a sweet deal on a vpap auto, after some research, I found out that it could be set up to work exactly like an autoset, so I bought it.
Then I found some times when I was starting to take a breath before an apnea, and the machine wasn't switching to ipap, so I took advantage of the resmed bilevel customizations and increased the trigger sensitivity, so it could help me breathe when my throat started to close up, ... and also that it was cutting off the higher pressure a lot of times when I was breathing slowly, so I changed the max time it would stay at IPAP. Having those customizations, which aren't available on a regular apap gave me better sleep. (AHI usually under 0.5).
Then I found some times when I was starting to take a breath before an apnea, and the machine wasn't switching to ipap, so I took advantage of the resmed bilevel customizations and increased the trigger sensitivity, so it could help me breathe when my throat started to close up, ... and also that it was cutting off the higher pressure a lot of times when I was breathing slowly, so I changed the max time it would stay at IPAP. Having those customizations, which aren't available on a regular apap gave me better sleep. (AHI usually under 0.5).
Last edited by palerider on Tue Apr 24, 2018 12:11 pm, edited 1 time in total.
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Re: Are you on a Bi-Level machine and if so why?
A CPAP will do 20, it just won't do that much pressure support.. best you could get would be 20/17.
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Re: Are you on a Bi-Level machine and if so why?
Here are some of the reasons that one might want a BiPAP. Note that if you already own a Bi-Pap and you need a plain old CPAP, you can just set it to work like a CPAP.
1. For patients with Central or Mixed Sleep Apnea, BiPAP is indicated, as a lower pressure on exhalation can reduce the number and severity of central events.
2. Patients who need a pressure greater than 20 would need a BiPAP. BiPAPs will generally go as high as 25 (some higher), and can even be on a fixed pressure above 20.
3. Patients who have difficulty exhaling against a fixed pressure and find that “exhalation relief” on a standard high-end CPAP is not sufficient. This can be due to additional medical issues such as Asthma, COPD, emphysema, or due to having a very high pressure setting (even if it’s not quite 20), or can just be idiosyncratic.
1. For patients with Central or Mixed Sleep Apnea, BiPAP is indicated, as a lower pressure on exhalation can reduce the number and severity of central events.
2. Patients who need a pressure greater than 20 would need a BiPAP. BiPAPs will generally go as high as 25 (some higher), and can even be on a fixed pressure above 20.
3. Patients who have difficulty exhaling against a fixed pressure and find that “exhalation relief” on a standard high-end CPAP is not sufficient. This can be due to additional medical issues such as Asthma, COPD, emphysema, or due to having a very high pressure setting (even if it’s not quite 20), or can just be idiosyncratic.
Re: Are you on a Bi-Level machine and if so why?
The more I read about ASV the more I feeI I need this...unless tweaking BiPAP settings and reducing leaks gets my apnea under control as well as yours.BTS wrote: ↑Tue Apr 24, 2018 11:31 amI have Complex Apnea.. CPAP and Auto BiPAP wouldn't do it for me so was switched to BiLevel ASV and it is amazing ... It just works while others didn't come close to getting to those centrals. Also regular BiPAP made the AHI through the roof upwards to 50+ a night ... Now I am sitting under 5 most nights 0.5-1 ...
Machine: Philips Respironics BiPAP C Series.
Mask: Respironics Comfort Gel Nasal Mask.
Pressure 12-18.
Mask: Respironics Comfort Gel Nasal Mask.
Pressure 12-18.
Re: Are you on a Bi-Level machine and if so why?
My reason for switching was simply to increase the upper limit of pressure the device could provide. With my Auto Set 10 I was regularly hitting 19'ish / 20 and staying there for hours at a time. It looks like I needed a bit more pressure but the APAP I had simply couldn't go any higher.
With my new BiPap It will sometimes go as high as 23 but I haven't seen it go any higher thankfully. My numbers are now averaging between 0.5 to 1.5 most nights. Bad night for me now is 3 or 4. Before my bad nights were like 8 or 9 or way worse and I was lucky to keep my overall average under 5.
Determining what you need is going to be based on experience. Get to know your machine, and your condition and how what you have now is treating it. Work out what the limits might be. Watch the data and see if you can work out any trends. (Get sleepy head, if you haven't already)
For me it was watching my pressure levels shoot up and flatten out at the machine's upper limit.
For you it might be issues with untreated centrals or other breathing anomalies you would want to work through.
When your starting out you work with your doctor as much as possible and hope they know what they're doing and care to look at your data for the details not just pat you on the back if your compliant. If you don't think your getting that sort of support you'll have to be your own advocate. There's a lot of combined knowledge on this site and plenty of people who can help you dig through the details.
Good luck in getting your therapy dialed in.
Rest well.
Gryphon
With my new BiPap It will sometimes go as high as 23 but I haven't seen it go any higher thankfully. My numbers are now averaging between 0.5 to 1.5 most nights. Bad night for me now is 3 or 4. Before my bad nights were like 8 or 9 or way worse and I was lucky to keep my overall average under 5.
Determining what you need is going to be based on experience. Get to know your machine, and your condition and how what you have now is treating it. Work out what the limits might be. Watch the data and see if you can work out any trends. (Get sleepy head, if you haven't already)
For me it was watching my pressure levels shoot up and flatten out at the machine's upper limit.
For you it might be issues with untreated centrals or other breathing anomalies you would want to work through.
When your starting out you work with your doctor as much as possible and hope they know what they're doing and care to look at your data for the details not just pat you on the back if your compliant. If you don't think your getting that sort of support you'll have to be your own advocate. There's a lot of combined knowledge on this site and plenty of people who can help you dig through the details.
Good luck in getting your therapy dialed in.
Rest well.
Gryphon
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ F10 Full Face Mask with Headgear |
Additional Comments: Oscar |
Re: Are you on a Bi-Level machine and if so why?
I was switched from S9 Autoset to PRS1 960 ASV because of centrals. Now my AHI stays below 3. I have had a few ZEROs. Seldom any centrals.
_________________
Mask: SleepWeaver 3D Soft Cloth Nasal CPAP Mask with Headgear |
Additional Comments: AurCurve 10 ASV Also using Sleaplyhead 1.1, ResScan 6 and CMS50i |
Re: Are you on a Bi-Level machine and if so why?
There are folks on this forum that do a fantastic job of helping you sort out what's going on with your treatment. Posting Sleephead data and turning them loose on what if anything you can do might be worthwhile.Chalkie wrote: ↑Tue Apr 24, 2018 12:38 pmThe more I read about ASV the more I feeI I need this...unless tweaking BiPAP settings and reducing leaks gets my apnea under control as well as yours.BTS wrote: ↑Tue Apr 24, 2018 11:31 amI have Complex Apnea.. CPAP and Auto BiPAP wouldn't do it for me so was switched to BiLevel ASV and it is amazing ... It just works while others didn't come close to getting to those centrals. Also regular BiPAP made the AHI through the roof upwards to 50+ a night ... Now I am sitting under 5 most nights 0.5-1 ...
As to using an ASV machine, that is what I have and use, but to be honest I much preferred the Bipap Machine the insurance company insisted I tried prior to spending for the ASV. The ASV machine works, and gets my numbers quite a bit better than the Bipap machine did due to my having some significant central issues from time to time. On the other hand, it's quite a bit harder to fall asleep with this machine even now that I'm quite used to it. To put it mildly, it gets very persistent on wanting you to breath in a very certain way, which I tend to not do right at the sleep transition point. As a result, getting to sleep can sometimes be quite difficult on those nights where I end up fighting with the machine. Personally I'd make sure my apnea couldn't be adequately treated with a BiPap prior to switching to an ASV.
Re: Are you on a Bi-Level machine and if so why?
That is the struggle and the downside of ASV for me atm too . It is very hard to get use to the breathing thing it does .. I am working hard on getting use to it and trying to sleep a solid set of hours straight through ... I am waking up still 4 or 5 times a night .. It has only been a week and I do already feel the benefits of the AHI dropping and killing off the Centrals but yeah if you can get by with BiLevel on its own I say stay there .. There was no way I could keep on doing BiPap it was tearing me apart, causing a lot of issues . Everyone's different...SeekSleep wrote: ↑Tue Apr 24, 2018 5:48 pmThere are folks on this forum that do a fantastic job of helping you sort out what's going on with your treatment. Posting Sleephead data and turning them loose on what if anything you can do might be worthwhile.Chalkie wrote: ↑Tue Apr 24, 2018 12:38 pmThe more I read about ASV the more I feeI I need this...unless tweaking BiPAP settings and reducing leaks gets my apnea under control as well as yours.BTS wrote: ↑Tue Apr 24, 2018 11:31 amI have Complex Apnea.. CPAP and Auto BiPAP wouldn't do it for me so was switched to BiLevel ASV and it is amazing ... It just works while others didn't come close to getting to those centrals. Also regular BiPAP made the AHI through the roof upwards to 50+ a night ... Now I am sitting under 5 most nights 0.5-1 ...
As to using an ASV machine, that is what I have and use, but to be honest I much preferred the Bipap Machine the insurance company insisted I tried prior to spending for the ASV. The ASV machine works, and gets my numbers quite a bit better than the Bipap machine did due to my having some significant central issues from time to time. On the other hand, it's quite a bit harder to fall asleep with this machine even now that I'm quite used to it. To put it mildly, it gets very persistent on wanting you to breath in a very certain way, which I tend to not do right at the sleep transition point. As a result, getting to sleep can sometimes be quite difficult on those nights where I end up fighting with the machine. Personally I'd make sure my apnea couldn't be adequately treated with a BiPap prior to switching to an ASV.
_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Additional Comments: ResMed S9 VPAP ST |
- raisedfist
- Posts: 1176
- Joined: Wed Jun 15, 2016 7:21 am
Re: Are you on a Bi-Level machine and if so why?
Yes - because of chronic respiratory failure. Without it I wake up with severe headaches from CO2 retention.
Philips Respironics Trilogy 100
AVAPS-AE Mode
PS Min 6, PS Max 18, EPAP Min 4, EPAP Max 12
AVAPS-AE Mode
PS Min 6, PS Max 18, EPAP Min 4, EPAP Max 12
Re: Are you on a Bi-Level machine and if so why?
Whether I eventually get an ASV or not I suspect I will have to persevere with BiPAP for a while. It does not appear the pressure settings are right for me so I need to deal with that first and I am sure as hell the hospital won't hand me an ASV until I have. I understand it would have to be under special dispensation anyway.
Machine: Philips Respironics BiPAP C Series.
Mask: Respironics Comfort Gel Nasal Mask.
Pressure 12-18.
Mask: Respironics Comfort Gel Nasal Mask.
Pressure 12-18.