ResScan Version 3.7 Software
ResScan Version 3.7 Software
I have been considering buying ResScan Version 3.7 Software. In the US it is very pricy. There is an Australian source online that is much more reasonable. Has anyone out there used from the US purchased from this source. Is it legitimate and is there any problem with software support in the US? Thanks.
Re: ResScan Version 3.7 Software
I'm confused what you are asking. I think maybe you left a word or two out of your question sentence.
_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear |
Additional Comments: Titrated @13 / Range 13-20 / Settling Off |
MDBarthe
-
- Posts: 50
- Joined: Fri May 15, 2009 12:50 pm
- Location: Wisconsin
Re: ResScan Version 3.7 Software
It is my understanding that ResMed doesn't want it sold to end users in the USA. Probably due to legal reasons. Consequently if one were to get a copy, I doubt that there would be any support unless you were an approved clinic.
Re: ResScan Version 3.7 Software
I've had no problem using the Rescan version 3.7 I bought from Australia (http://www.cpapaustralia.com.au). It was a lot cheaper and the service was good. I don't think you'll get support here in the US either; unless you're a professional/doc/clinic. Just remember that the currency conversion to US dollars will give you the true savings.
Good Luck,
Mike
Good Luck,
Mike
_________________
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Titrated Pressure: 8 cm/H2O, Current: 9.8 cm/H2O |
Mike
Re: ResScan Version 3.7 Software
I can help you
Check your PM's
K
Check your PM's
K
- buzzkill58
- Posts: 14
- Joined: Wed May 27, 2009 3:56 pm
- Location: Ohio
- Contact:
Re: ResScan Version 3.7 Software
I heard that ResMed is cracking down on customers obtaining the ResScan software and cpap.com is having troubles obtaining product. Any suggestions on were I might get the software?
Buzz
Buzz
Yes... I am a ham (Amateur Radio)
Re: ResScan Version 3.7 Software
Ah, I was wondering why cpap.com didn't seem to have copies of the software anymore.
That is unfortunate.
That is unfortunate.
Re: ResScan Version 3.7 Software
Buzz, I found it at http://thecpapshop.com. It's actually slightly cheaper than here at cpap.com. I've been waiting on getting it along with a card reader, but perhaps I should get it before I no longer can! I was waiting because of $$ and because I wanted to see if this (3.7) or a newer version would support Windows 7. I was also waiting for cpap.com to get it back in stock, so I could have them price match.buzzkill58 wrote:I heard that ResMed is cracking down on customers obtaining the ResScan software and cpap.com is having troubles obtaining product. Any suggestions on were I might get the software?
_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: CPAP 6/5/2009, Rx: 11-16, OSCAR |
Re: ResScan Version 3.7 Software
As of 6/18/09 the CPAP Shop is out of stock on ResScan 3.7
Ganesha
Hindu god of intellect and wisdom. Remover of Obstacles.
I am not a Hindu or a god, just Mark from New Jersey. But the CPAP mask makes me look like Ganesha.
________________________________________________________________________________________
Hindu god of intellect and wisdom. Remover of Obstacles.
I am not a Hindu or a god, just Mark from New Jersey. But the CPAP mask makes me look like Ganesha.
________________________________________________________________________________________
Re: ResScan Version 3.7 Software
I just called them, as I placed my order on 6/16 and hadn't received an email re shipping. They say the software is backordered and that Resmed has always been slow to supply this product. They see no reason, however, why they should not be able to fulfill my order. Fingers crossed that I can actually get the software!Ganesha wrote:As of 6/18/09 the CPAP Shop is out of stock on ResScan 3.7
_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: CPAP 6/5/2009, Rx: 11-16, OSCAR |
Re: ResScan Version 3.7 Software
I just called them and they said it is on backorder still. I didnt want to submit my order as they charge your card right away and sometimes you have to wait weeks to get the procduct...
The gentleman then told he "didnt know why I would want it as I am not going to understand the information that it is going to show me anyway?? Will I ?
Im a newbie...been on my machine for 7 days now.. I luckily found your site before I got my order for the DME and intervened with my doctor and made him write the prescription for a ResMed S8 Elite II wih an H4i humidifier. I would like to get the software because my GP told me he does not have a reader, if he doesnt have a reader who is going to keep track of what is going on with me..... I already know the answer to that... I will.
What do you all think? Will the software be beneficial for me to have?
Krista
The gentleman then told he "didnt know why I would want it as I am not going to understand the information that it is going to show me anyway?? Will I ?
Im a newbie...been on my machine for 7 days now.. I luckily found your site before I got my order for the DME and intervened with my doctor and made him write the prescription for a ResMed S8 Elite II wih an H4i humidifier. I would like to get the software because my GP told me he does not have a reader, if he doesnt have a reader who is going to keep track of what is going on with me..... I already know the answer to that... I will.
What do you all think? Will the software be beneficial for me to have?
Krista
Re: ResScan Version 3.7 Software
Yes! You can get the software for about half the price at CPAP Australia. http://www.cpapaustralia.com.au/shoppin ... 31305.html. You can't order it off the web, however, and you have to call them on the phone. I got the software for $99 + $20 shipping AUD, which ended up being just under $99USD total. Don't buy the card reader from them, as it is more expensive. I got mine from cpap.com.Krista wrote:What do you all think? Will the software be beneficial for me to have?
Krista
I've just been using the software for a couple days, but I've been able to see I have a bigger leak problem than the LCD data from my Elite II led me to believe.
Anyway, welcome to the forum and good luck!
_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: CPAP 6/5/2009, Rx: 11-16, OSCAR |
Re: ResScan Version 3.7 Software
Donchya know that apneans are stupid boobs and incapable of larnin' what all them thar numbers and tables and thin's mean? Apneans ain't capable of being eddycated like them diabetic type peoples.
_________________
Mask: Quattro™ FX Full Face CPAP Mask with Headgear |
Additional Comments: PR SystemOne BPAP Auto w/Bi-Flex & Humidifier - EncorePro 2.2 Software - Contec CMS-50D+ Oximeter - Respironics EverFlo Q Concentrator |
Women are Angels. And when someone breaks our wings, we simply continue to fly.....on a broomstick. We are flexible like that.
My computer says I need to upgrade my brain to be compatible with its new software.
My computer says I need to upgrade my brain to be compatible with its new software.
-
- Posts: 82
- Joined: Sat Jun 14, 2008 8:13 pm
Re: ResScan Version 3.7 Software
Verrry interesting! I do not understand why we also need
a $70 USB cord? (This is listed on CPAP.COM ResScan components.)
Leonbergergirl
a $70 USB cord? (This is listed on CPAP.COM ResScan components.)
Leonbergergirl
Re: ResScan Version 3.7 Software
If you need 3.7 send me a pm - I can help