After trying a number of masks over the past 6 months, I've settled on the Mirage Activa LT as the ONLY one I can sleep comfortably with.
Every time I try to clean the mask, the plastic spine inside comes out. I can't seem to get it back in properly aligned - either the plastic clips won't clip in, or when I get them clipped in (usually forcing them) and put on the mask, it's leaking beyond use and I can poke a finger through the spot where the mask and spine don't meet.
Is there some sort of trick to get this put back together?
I'm on my last one now and it fell apart at 1AM last night (made the mistake of cleaning it yesterday morning) with replacements not being sent to me for another two weeks.
Any help would be appreciated!
Thanks
Resmed Mirage Activa LT mask problem - help needed
Resmed Mirage Activa LT mask problem - help needed
Machine: Resmed S9 Autoset
Mask: Resmed Mirage Activa LT
Humidifier: H5i Humidifier with Heated Tube and 36800 cleanable water tub
Additional Comments: Rx Pressure: 9, APAP set to 6-12
Mask: Resmed Mirage Activa LT
Humidifier: H5i Humidifier with Heated Tube and 36800 cleanable water tub
Additional Comments: Rx Pressure: 9, APAP set to 6-12
Re: Resmed Mirage Activa LT mask problem - help needed
http://www.ebay.com/sch/?_nkw=Mirage%20 ... 2689998208
Check EBay for the replacement part. I don't use this mask so unfamiliar with what you are describing as a problem. Other members will chime in that do know what you are talking about.
But check EBay...you may not need an entire new mask set up.
Or check cpap.com mask replacement parts.
https://www.cpap.com/productpage-replac ... dgear.html
Check EBay for the replacement part. I don't use this mask so unfamiliar with what you are describing as a problem. Other members will chime in that do know what you are talking about.
But check EBay...you may not need an entire new mask set up.
Or check cpap.com mask replacement parts.
https://www.cpap.com/productpage-replac ... dgear.html
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
Re: Resmed Mirage Activa LT mask problem - help needed
Not a replacement part. Basically the mask is two parts - the mask itself and a plastic spine that fits inside the mask and clips into the headpiece, holding the mask in place. Nothing is "broken", but the spine is out and needs to go back in, but whenever I put it in and re-clip in, the mask leaks. I believe the part normally does come out for cleaning - I just can't get it back together.
OK - The spine is called the cushion clip and is available at https://www.cpap.com/productpage/resmed ... -mask.html
Mask with the clip is at https://www.cpap.com/productpage/resmed ... -mask.html
There's nothing wrong with my cushion clip...except that I can't get it back into the mask without the mask leaking!
OK - The spine is called the cushion clip and is available at https://www.cpap.com/productpage/resmed ... -mask.html
Mask with the clip is at https://www.cpap.com/productpage/resmed ... -mask.html
There's nothing wrong with my cushion clip...except that I can't get it back into the mask without the mask leaking!
Machine: Resmed S9 Autoset
Mask: Resmed Mirage Activa LT
Humidifier: H5i Humidifier with Heated Tube and 36800 cleanable water tub
Additional Comments: Rx Pressure: 9, APAP set to 6-12
Mask: Resmed Mirage Activa LT
Humidifier: H5i Humidifier with Heated Tube and 36800 cleanable water tub
Additional Comments: Rx Pressure: 9, APAP set to 6-12
Re: Resmed Mirage Activa LT mask problem - help needed
Perhaps this will help:
http://www.resmed.com/us/assets/multime ... 50x300.swf
Click "next" at bottom right of page, to see all the steps.
Katie
http://www.resmed.com/us/assets/multime ... 50x300.swf
Click "next" at bottom right of page, to see all the steps.
Katie
_________________
Mask: Pico Nasal CPAP Mask with Headgear |
Additional Comments: Resmed AirCurve 10 ASV and Humidifier, Oscar for Mac |
KatieW