Respironics Smartcard Reader / Encore Pro
Respironics Smartcard Reader / Encore Pro
I bought a smartcard reader (DT-3500) and picked up Encore Pro 1.8.49. I tried to read the data off of my smartcard. I saw compliance data one time...then I think the card got corrupted. It failed to read it again. My Series-M Auto would only beep when I inserted the card - a smartcard error. I had to run with no card last night.
Today I erased the card, and programmed it with my prescripted settings again. It seems to be able to read it repeatedly. I will try it in the machine again tonight.
What are the implications of having wiped & re-initialized my smartcard? The patient number and personal data may be different. I don't have any re-checks with the DME scheduled, so I don't know how they'll ever know.
Today I erased the card, and programmed it with my prescripted settings again. It seems to be able to read it repeatedly. I will try it in the machine again tonight.
What are the implications of having wiped & re-initialized my smartcard? The patient number and personal data may be different. I don't have any re-checks with the DME scheduled, so I don't know how they'll ever know.
Re: Respironics Smartcard Reader / Encore Pro
As long as your DME doesn't have to track you, none. No need to put the script on the card, the machine remembers what it had before, the card script is just for making a change remotely. Sometimes when you put the card back in the machine it messes up as the contacts align, to cure that put the machine on a power strip and shut it off to insert and remove the card. (No power spikes) Usually I just grit my teeth, and push it in. Jim
Use data to optimize your xPAP treatment!
"The art of medicine consists in amusing the patient while nature cures the disease." Voltaire
"The art of medicine consists in amusing the patient while nature cures the disease." Voltaire
Re: Respironics Smartcard Reader / Encore Pro
I am sure you did this already but make sure you put the card in the correct way. It will go in both way and one way will work the other it will beep for an error.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: ResMed AirFit™ F30 Full Face CPAP Mask with Headgear |
Re: Respironics Smartcard Reader / Encore Pro
After clearing the card and re-initializing it, all is well. It is capturing data and I have been able to read reports with Encore Pro.
Re: Respironics Smartcard Reader / Encore Pro
Which way should the card face to be reinserted into the machine? Newbie here-no directions on card, amd just returned from Dr. visit and told to reinsert card w/new pressure info-but afraid to put it in facing wrong way!!! feeling stupid
Re: Respironics Smartcard Reader / Encore Pro
Color side to outside of machine.
"If it weren't for electricity we'd all be watching television by candlelight. "
.............Kate Hepburn
.............Kate Hepburn
Re: Respironics Smartcard Reader / Encore Pro
Just had the same problem with my Smartcard. How do I initialize/clear it? What aret he steps.
Re: Respironics Smartcard Reader / Encore Pro
Just noticed that this thread is for Encore Pro users. My software is Encore Viewer - v1. I don't know if that makes a difference with the repsonse to my question.
- 2flamingos
- Posts: 439
- Joined: Mon Apr 27, 2009 7:26 pm
- Location: L.A. (Lower Alabama)
Re: Respironics Smartcard Reader / Encore Pro
I don't think the beep is necessarily an error message - mine beeps everytime i remove the card and every time i reinsert. I have not lost any data so far, nor has it given me any problems. I have acutally taken it out, read it using viewer, reinserted it, and then less than 15 minutes later removed it to use pro for trend and analysis. Again, no probs - but beeps each time.
_________________
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Pressure - 12-16 ClimateLine Hose. Zeo Mobile, Chin Strap |
Old enough to know better
Karma is a Wonderful Thing.
Karma is a Wonderful Thing.
Re: Respironics Smartcard Reader / Encore Pro
It does make a difference. With Viewer you can not erase the card but Pro can. I have had better luck using the utility that you can download at mycpap.org. It not only erases but it reformats the card as well.AndyS wrote:Just noticed that this thread is for Encore Pro users. My software is Encore Viewer - v1. I don't know if that makes a difference with the repsonse to my question.
Jerry
_________________
Humidifier: HC150 Heated Humidifier With Hose, 2 Chambers and Stand |
Additional Comments: 11cm/H2O, Encore Pro 1.8i, Pro Analyzer, Encore Viewer1.0 - 3 Remstar Pro2's, 1 Remstar Auto |
Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting: "Wow what a ride!"
I still play Cowboys and Bad Guys but now I use real bullets. CAS
I still play Cowboys and Bad Guys but now I use real bullets. CAS
Re: Respironics Smartcard Reader / Encore Pro
Is the machine yours yet, or are you still renting it due to Medicare or Insurance requirements?What are the implications of having wiped & re-initialized my smartcard? The patient number and personal data may be different. I don't have any re-checks with the DME scheduled, so I don't know how they'll ever know.
If you are still renting and it is officially not your machine yet . . . there could be a problem if your data is gone. Medicare needs data to prove compliance.
In Kentucky, Medicare checks cards at 30 days, 60 days, then at 6 months and maybe more, I've forgotten. So I have to be sure I haven't erased or there could be a problem with Medicare. In Kentucky the machine isn't "owned" by the patient until 13 months.
Joy
_________________
Machine: Airsense 10 Card to Cloud |
Mask: Zest Nasal CPAP Mask with Headgear |
Additional Comments: CPAP Pr 14.0; EPR:3 Full; Heated Hose; 1" NexCare Low Trauma Tape; PurSleep Buckwheat Hull Pillow; Caldera Releaf Collar. |
Other Accessories & Software: Wellue O2 Ring; OSCAR; SleepHQ Pro.
Re: Respironics Smartcard Reader / Encore Pro
I was/am on Medicare in Texas and I never had anyone even ask me whether mine had a card. My Doc and DME did not have the program to read it. After 6 months I got curious and found another DME that read it and gave me a copy. I know things may have changed since then (Dec 06). Medacare and insurance bought to many machines that ended up in the closet, and were sold a few years later. Did get one call from the DME during that time,"are you still using It?" "Yes". That was it!JoyD. wrote:Is the machine yours yet, or are you still renting it due to Medicare or Insurance requirements?What are the implications of having wiped & re-initialized my smartcard? The patient number and personal data may be different. I don't have any re-checks with the DME scheduled, so I don't know how they'll ever know.
If you are still renting and it is officially not your machine yet . . . there could be a problem if your data is gone. Medicare needs data to prove compliance.
In Kentucky, Medicare checks cards at 30 days, 60 days, then at 6 months and maybe more, I've forgotten. So I have to be sure I haven't erased or there could be a problem with Medicare. In Kentucky the machine isn't "owned" by the patient until 13 months.
Joy
Jerry
_________________
Humidifier: HC150 Heated Humidifier With Hose, 2 Chambers and Stand |
Additional Comments: 11cm/H2O, Encore Pro 1.8i, Pro Analyzer, Encore Viewer1.0 - 3 Remstar Pro2's, 1 Remstar Auto |
Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting: "Wow what a ride!"
I still play Cowboys and Bad Guys but now I use real bullets. CAS
I still play Cowboys and Bad Guys but now I use real bullets. CAS
Re: Respironics Smartcard Reader / Encore Pro
I should have checked my Respironics manual first: on p.5-2, under "SmartCard Error" it says (paraphrasing) if you get continous beeps, all 3 backlights flashing and a flashing SmartCard icon on the screen, the card is either inserted improperly (mine isn't) or the data on it may be corrupt. I called my home care provider and they are going to replace the card. I'll post the results.
_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear |
Additional Comments: M-Series BIPAP has Smart Card |